Ivanti EPMM appliance setup
If you are installing a physical appliance, you will need to configure the system either with a standard VGA monitor and keyboard, or via the serial console. To access to the serial console, you can use a PC or remote console system. Use Putty or HyperTerminal if you are using a PC.
To set up console access:
- Connect a console cable to the appropriate port on the back of the appliance.
- Connect a serial cable to a PC or remote console system.
Hardware appliances
The following table describes which appliances are supported on Ivanti EPMM and Enterprise Connector .
Table: Appliances supported by Ivanti EPMM and Enterprise Connector
Product | Supported | Compatible |
|---|---|---|
Ivanti EPMM | M2250, M2600, M2700 | N/A |
Maximum number of supported devices
The following table summarizes the maximum number of supported devices on each Ivanti EPMM appliance.
Table: Device capacity for Ivanti EPMM appliances
Model | Maximum Number of Devices | Testing Standard |
|---|---|---|
M2600, M2700 | 200,000 | The maximum number of supported devices, for each appliance, is based on a rate of 1 device registration per second. This maximum number of supported devices will change, depending on individual use cases and work load for each appliance. IPv4 is supported. |
M2250 | 60,000 |