SNMP

8 min

Ivanti EPMM provides (Simple Network Management Protocol (SNMP) capabilities. SNMP is a protocol used for network management for collecting information about network entities, such as servers and devices, on an Internet Protocol (IP) network. Various third-party SNMP systems are available that provide SNMP-based management and tools.

Ivanti EPMM provides the following SNMP capabilities:

Ivanti EPMM sends these two SNMP traps (events) to a specified SNMP trap receiver using the SNMP v2c protocol.

Link up and down traps

An SNMP server can request information from Ivanti EPMM related to these management information bases (MIBs):

The HOST-RESOURCES-MIB

Apache web server configuration and status values (APACHE2-MIB).

disk I/O (UCD-DISKIO-MIB)

Support for SNMP v2c and v3 protocols to pull MIB information from Ivanti EPMM to the SNMP server.

Ivanti EPMM limits Incoming SNMP requests to around 10 SNMP requests per minute.

Configuring SNMP on Ivanti EPMM

This section includes the general workflow to configure SNMP:

Step 1	Configuring the SNMP trap receiver server to which Ivanti EPMM sends SNMP traps.
Step 2	Enabling the SNMP service with the v3 protocol from whom Ivanti EPMM accepts requests.
Step 3	Enabling the SNMP service with the v2c protocol between Ivanti EPMM and your SNMP server.

Configuring the SNMP trap receiver server

Configure the server to which Ivanti EPMM sends SNMP traps. This server can also get MIB information from Ivanti EPMM.

Procedure

Go to Settings > SNMP to open the SNMP details pane.

Click Add to open the Add SNMP Trap Receiver window.

Edit the fields, as necessary. Refer to the Add SNMP Trap Receiver window table for details.

Click Apply > OK to save the changes.

Add SNMP Trap Receiver window

The following table summarizes fields and descriptions in the Add SNMP Trap Receiver window:

Table: Add SNMP Trap Receiver values

Fields	Description
Server	Enter the server name for your SNMP trap receiver. For example: trapreceiver.myCompanyDomain.com
Port	Enter the port number for your SNMP trap receiver.
Community	Enter the string which names the SNMP community on your SNMP trap receiver.
Version	Ivanti EPMM sends SNMP traps using SNMP protocol V2c. You can choose V2c or V3 for MIB requests.
Admin State	Select Enable to enable the SNMP service for this SNMP server.

Deleting SNMP trap receiver servers

Procedure

Go to Settings > SNMP to open the SNMP details pane.

Select one or more of the servers you want to delete.

Click the box next to Server to select all servers in the list.

Click Delete > Yes.

Enabling the SNMP service with the v3 protocol

Set up the SNMP v3 user from whom Ivanti EPMM accepts requests. In addition, you can enable or disable sending traps to any configured SNMP trap receiver.

Procedure

To enable the SNMP service with the SNMP v3 protocol:

Go to Settings > SNMP.

Go to the SNMP Control section > SNMP Service.

Select Enable.

Go to the Protocol option and verify that v3 is selected. The v3 option is selected, by default.

Click Add.

Enter the SNMP v3 user fields, as necessary. See the Add SNMP v3 User window for details.

Click Save.

Go to Link Up/Down Trap.

Click Enable.

Select Disable. This stops Ivanti EPMM from sending SNMP traps to any SNMP trap receiver.

Click Apply > OK to save the changes.

Add SNMP v3 User window

Table: Add SNMP v3 User window

Fields	Description
User Name	Enter the user name without any spaces (example: miuser).
Security Level	Select a security level for authentication. The options are: noAuthNoPriv: Without Authentication or Privacy. authNoPriv: With Authentication and without Privacy authPriv: With Authentication and Privacy
Auth Protocol	Select an authentication protocol. This can be selected only if the Security Level is selected as authNoPriv or authPriv.
Auth Password	Enter the Auth Password with a minimum of 8 characters. Note: From 11.12.0.0 release, the Auth password will not support these characters: '$','', '"', ''', '`' Also, existing passwords that contain these characters must be updated before saving SNMP settings.
Privacy Protocol	Select a privacy protocol. This can be selected only if Security Level is selected as authPriv.
Privacy Password	Enter a privacy password with minimum of 8 characters. Note: From 11.12.0.0 release, the Privacy password will not support these characters: '$','', '"', ''', '`' Also, existing passwords that contain these characters must be updated before saving SNMP settings.

Deleting SNMP v3 users

Procedure

Go to Settings > SNMP.

Go to the SNMP Control group.

Select one or more of the users you want to delete. Click the box next to User Name to select all users in the list.

Click Delete > Yes.

Enabling the SNMP service with the v2c protocol

Set up the SNMP v2c communication between Ivanti EPMM and your SNMP server. You also enable or disable sending traps to any configured SNMP trap receiver.

Procedure

Go to Settings > SNMP.

Go to the SNMP Control section > SNMP Service.

Select Enable.

Go to the Protocol option and select v2.

Change the value of Read Only Community if necessary. The standard SNMP community name is public. This is the community the SNMP server uses to pull MIB information from EPMM.

Go to the Link Up/Down Trap option and select Enable.

Select Disable. This stops Ivanti EPMM from sending SNMP traps to any SNMP trap receiver.

Click Apply > OK to save the changes.