VPN On Demand
Applicable to: iOS devices
A VPN On Demand configuration sets up access to a VPN server based on domains, host names, etc.
VPN On Demand settings
Setting | What To Do |
|---|---|
Name | Enter a name that identifies this configuration. |
Description | Enter a description that clarifies the purpose of this configuration. |
Connection Type | Select the type of VPN to configure. The remaining settings depend on this selection. |
Enable VPN On Demand | Select to use this configuration for domains and host names that establish a VPN on demand. |
Enable iOS Rules (Applicable if Enable VPN On Demand is selected) | For iOS and macOS, you can set up:
|
Provider Type (iOS 9+) | Select one of the following tunnel providers:
|
EnforceRoutes | When enabled, the VPN's non-default routes overrides any locally defined routes.
|
ExcludeLocalNetworks | When enabled along with IncludeAllNetworks, all local network traffic routes outside of the VPN. |
IncludeAllNetworks | When enabled, it routes all traffic through the VPN. |
The protocols and their settings are listed as follows:
IPsec (Cisco)
Setting | What To Do |
|---|---|
Server | Enter the IP address or host name for the VPN server. |
Account | Enter the user account to be used for authenticating the connection.* |
Machine Authentication | Only Certificate authentication is supported. |
Credential | Select the identity certificate to use. |
Include User PIN | Select to prompt the user for a PIN. |
Proxy Setup | Select Manual or Automatic to configure a proxy. If you select Manual, then the following additional fields are available:
|
Cisco AnyConnect
Setting | What To Do |
|---|---|
Server | Enter the IP address or host name for the VPN server. |
Account | Enter the user account to be used for authenticating the connection.* |
Group | Enter the group to use to authenticate the connection. |
User Authentication | Only Certificate authentication is supported. |
Credential | Select the identity certificate to use. |
Proxy Setup | Select Manual or Automatic to configure a proxy. If you select Manual, then the following additional fields are available:
|
Juniper SSL
Setting | What To Do |
|---|---|
Server | Enter the IP address or host name for the VPN server. |
Account | Enter the user account to be used for authenticating the connection.* |
Realm | Enter the authentication realm to be used for authenticating the connection. |
Role | Enter the authentication role to be used for authenticating the connection. |
User Authentication | Only Certificate authentication is supported. |
Credential | Select the identity certificate to use. |
Proxy Setup | Select Manual or Automatic to configure a proxy. If you select Manual, then the following additional fields are available:
|
NetMotion VPN
Setting | What To Do |
|---|---|
Server | Enter the IP address or host name for the VPN server. |
Account | Enter the user account to be used for authenticating the connection.* |
User Authentication | Certificate is the user authentication method. Credential: Select the identity certificate to use. |
Proxy Setup | Select Manual or Automatic to configure a proxy. If you select Manual, then the following additional fields are available:
|
F5 SSL
Setting | What To Do |
|---|---|
Server | Enter the IP address or host name for the VPN server. |
Account | Enter the user account to be used for authenticating the connection.* |
User Authentication | Only Certificate authentication is supported. |
Credential | Select the identity certificate to use. |
Proxy Setup | Select Manual or Automatic to configure a proxy. If you select Manual, then the following additional fields are available:
|
SonicWALL Mobile Connect
Setting | What To Do |
|---|---|
Server | Enter the IP address or host name for the VPN server. |
Account | Enter the user account to be used for authenticating the connection.* |
Login Group or Domain | Enter the login group or domain to be used for authenticating the connection. |
User Authentication | Only Certificate authentication is supported. |
Credential | Select the identity certificate to use. |
Proxy Setup | Select Manual or Automatic to configure a proxy. If you select Manual, then the following additional fields are available:
|
Aruba VIA
Setting | What To Do |
|---|---|
Server | Enter the IP address or host name for the VPN server. |
Account | Enter the user account to be used for authenticating the connection.* |
User Authentication | Only Certificate authentication is supported. |
Credential | Select the identity certificate to use. |
Proxy Setup | Select Manual or Automatic to configure a proxy. If you select Manual, then the following additional fields are available:
|
Custom SSL
Setting | What To Do |
|---|---|
Identifier | Enter the identifier for this custom SSL VPN in reverse DNS format (such as com.mycompany.myserver). |
Server | Enter the IP address or host name for the VPN server. |
Account | Enter the user account to be used for authenticating the connection.* |
Custom Data | Enter the key-value pairs that define the custom data for this VPN. |
User Authentication | Only Certificate authentication is supported. |
Credential | Select the identity certificate to use. |
Proxy Setup | Select Manual or Automatic to configure a proxy. If you select Manual, then the following additional fields are available:
|
Palo Alto Networks GlobalProtect
Setting | What To Do |
|---|---|
Server | Enter the IP address or host name for the VPN server. |
Account | Enter the user account to be used for authenticating the connection. |
Custom Data | Enter the key-value pairs that define the custom data for this VPN. |
User Authentication | Certificate is the user authentication method. Select an identity certificate to use in the Credential field. |
Proxy Setup | Select Manual or Automatic to configure a proxy. If you select Manual, then the following additional fields are available:
|
Type $ to see a list of supported variables, if available, for this field.
For more information, see How to create a configuration
