IPV6 commands
This section describes IPV6 commands.
Table: IPV6 commands
Command | Mode | Description |
|---|---|---|
ipv6 enable | Configure terminal | Enables IPV6 on the system |
ipv6 disable | Configure terminal | Disable IPV6 on the system |
ipv6 address <ipv6 address> <ipv6 network prefix> <ipv6 default gateway (optional)> | Configure terminal > Configure interface GigabitEthernet 1 | Assigns IPV6 address to Gigabit Ethernet 1 interface |
no ipv6 address | Configure terminal > Configure interface Gigabitethernet 1 | Removes IPV6 address from Gigabit Ethernet 1 interface |
ipv6 route <ipv6 address> <ipv6 network prefix> <gateway address> | Configure terminal | Adds an IPV6 route |
ping6 <ipv6 address> | Enable mode | Able to ping a destination with IPV6 address |
show ipv6 route | Enable mode | Displays all available IPV6 routes |
show ipv6 interface brief GigabitEthernet 1 | Enable mode | Displays the IPV6 configuration on a network interface |
traceroute6 <ipv6 address> | Enable mode | Traces route to the IPV6 destination |
ipv6 name-server <ipv6 address of the name server> <index> | Configure terminal | Adds a name server with IPV6 address |
ping6 <domain or ipv6 address> | Enable | Pings IPV6 address |
