EXEC mode command details
enable
Enables EXEC PRIVILEGED mode for access to advanced commands.
Prompts for the enable-secret password, which is the system password initially set during installation. Entering the correct password changes the command line prompt from > to #.
Example
> enable
Password:
#
See also enable secret
exit
Exits the EXEC mode and closes the terminal window.
help
Displays a description of the interactive help system, including:
- Auto-completion keys
- Movement keys
- Deletion keys
See Help commands.
host
Queries Internet name servers to perform a DNS lookup. Specify one of the following parameters:
Table 3. host command parameters
Parameter | Description |
|---|---|
hostname | The hostname of the destination server to look up. |
IP address | The IP address of the destination server to look up. |
This command returns the hostname of the server if you specify an IP address. It returns the IP address if you specify the hostname.
This command executes the Linux command nslookup. See Linux man pages for more information.
Example
>host yahoo.com
Server: 172.16.0.1
Address: 172.16.0.1#53
Non-authoritative answer:
Name: yahoo.com
Address: 98.137.149.56
Name: yahoo.com
Address: 98.139.180.149
Name: yahoo.com
Address: 209.191.122.70
Name: yahoo.com
Address: 72.30.2.43
logout
Exits from the EXEC mode and closes the terminal window.
ping
This command sends echo messages (pings) to the destination server that the parameter specifies.
Specify one of the following parameters:
Table 4. ping command parameters
Parameter | Description |
|---|---|
hostname | The destination’s host name. |
IP address | The destination’s IP address. |
Example
>ping yahoo.com
show banner
Displays the banner that was displayed when you logged on to the command line interface.
Example
>show banner
************************************************************
* Ivanti EPMM CLI *
* *
* *
************************************************************
Welcome user it is Tue Dec 13 21:27:03 UTC 2011
show clock
Displays the current system date, time, and time zone.
Example
> show clock
Displaying system clock details
Tue Dec 13 21:25:12 UTC 2011
show common_criteria_mode_status
Displays whether Common Criteria mode is enabled.
Example
> show common_criteria_mode_status
Common Criteria Mode is enabled.
>
show fips
Displays whether FIPS mode is enabled.
Example
> show fips
FIPS 140 mode is disabled.
>
show hostname
Displays the hostname for Ivanti EPMM.
Example
>show hostname
appname.domain.com
show interfaces
Displays the configuration of the network interfaces configured for Ivanti EPMM.
Example
>show interfaces
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:0c:29:6b:c6:23 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 00:0c:29:6b:c6:2d brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 00:0c:29:6b:c6:37 brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 00:0c:29:6b:c6:41 brd ff:ff:ff:ff:ff:ff
show ip
Displays IP information.
Specify one of the following parameters:
Table 5. show ip command parameters
Parameter | Description |
|---|---|
arp | Displays the physical network address that corresponds to the IP address of Ivanti EPMM. ARP is Address Resolution Protocol, a low-level network protocol. |
domain-name | Displays the domain name of Ivanti EPMM. |
interface brief | Displays IP interface status and configuration. Add the following parameters to the command: <ifacename> <interfaceid> The <ifacename> is either GigabitEthernet or VLAN. The <interfaceid> has the value 1 to 6 for GigabitEthernet and 1 - 4094 for VLAN. These interfaces are configured using the Ivanti EPMM System Manager in the Admin Portal, described in “Managing network interfaces” in the Ivanti EPMM System Manager Guide. |
name-server | Displays the IP address of the Internet name servers that Ivanti EPMM uses. These interfaces are configured using the Ivanti EPMM System Manager in the Admin Portal, described in “DNS and Hostname” in the Ivanti EPMM System Manager Guide. |
route | Displays the routing table of Ivanti EPMM. These static network routes are configured using the Ivanti EPMM System Manager in the Admin Portal, described in “Routes” in the Ivanti EPMM System Manager Guide. |
Example
>show ip domain-name
+------------------
Domain Name
+------------------
mydomain.com
>show ip interface brief GigabitEthernet 1
+----------------+-----------+--------------+-------------+-------------------
Interface IP Address Mask Hw Addr Admin State
+----------------+-----------+--------------+-------------+-------------------
GigabitEthernet1 10.10.17.152 255.255.0.0 00:50:56:91:22:7e up
>show ip route
192.168.57.0/24 via 10.10.1.1 dev eth0
10.10.0.0/16 dev eth0 proto kernel scope link src 10.10.17.80
default via 10.10.1.1 dev eth0
In the show ip route output, default indicates that the network and mask are both 0.0.0.0.
show log
Displays the log file that the parameter specifies.
Consider the following when viewing log files:
- To navigate within the log, use standard vi commands.
- To exit the log, enter q to quit.
The log files are in the Linux directory /var/log.
The command takes one parameter that is the name of the log file. The following table lists the available log file names you can use:
Table 6. show log command available log file names
Log file name | Description |
|---|---|
mi.log | A superset of the information in the mics, mifs, and employee logs. |
startup.log | Information logged during startup. |
cron | All cron jobs run since last reboot. |
rpmpkgs | A listing of all the deployed rpm packages on the system. |
boot.log | Information collected during boot up. |
suspend.log | Not used. |
mysqld.log | Information collected during MySQL startup. |
messages | All system messages since last restart. |
dmesg | Hardware status messages collected during startup. |
secure | List of executed commands since last restart. |
mivmstat.log | Running log of information about the virtual machine, including, but not limited to, processes, free, buffered, and cached memory, swap, i/o, system, and CPU. |
mics.log | WARN, INFO, and ERROR messages from the Ivanti EPMM System Manager. |
employee.log | WARN, INFO, and ERROR messages about employee device registration activity. |
mifs.log | WARN, INFO, and ERROR messages from the Admin Portal. |
mai.log | MAI information, if MAI is enabled. |
catalina.out | Stdout for the tomcat1 server. Includes verbose Employee and MIFS logs. |
catalina2.out | Stdout for the tomcat2 server. A verbose MIFS log. |
catalina3.out | Stdout for the tomcat3 server. A verbose MAI log, if MAI is enabled. |
catalina4.out | Stdout for the tomcat4 server. A verbose Atlas log, if Atlas is enabled. |
Example
> show log mifs.log
> --log 'tomcat/mifs.log' --
show logging
Displays the configured syslog server information:
- IP address
- log level
- state
This information is configured in the Ivanti EPMM System Manager, in Settings > Data Export SysLog Servers, described in “Syslog” in the Ivanti EPMM System Manager Guide.
The log level values displayed by this command correspond to the configured log levels as follows:
Table 7. show logging command log levels
Log level value | Log level description |
|---|---|
0 | Emergency |
1 | Alert |
2 | Critical |
3 | Error |
4 | Warning |
5 | Notice |
6 | Info |
7 | Debug |
Example
>show logging
+--------------+--------------+---------------
IP Address + Loglevel + State
+--------------+--------------+---------------
myLogserver.com 5 enable
show logtail
Displays the last ten lines (the tail) of the specified log. The command takes one parameter that is the name of the log file. See show log for the list of available log files.
To exit from the show logtail command, enter Ctrl-C.
Example
>show logtail mifs.log
--log 'tomcat/mifs.log' --tail --
/mi/tomcat2/webapps/mics/WEB-INF/pages/include.jsp
/mi/tomcat2/webapps/mics/WEB-INF/pages/index.jsp
/mi/tomcat2/webapps/mics/WEB-INF/pages/styles
/mi/tomcat2/webapps/mics/WEB-INF/pages/styles/mobir.css
/mi/tomcat2/webapps/mics/WEB-INF/pages/listRadius.jsp
/mi/tomcat2/webapps/mics/WEB-INF/pages/micsLogin.jsp
/mi/tomcat2/webapps/mics/WEB-INF/remoting-servlet.xml
/mi/tomcat-properties/license.properties
/mi/tomcat-properties/datapurge.properties
/mi/tomcat-properties/mifs.properties
show memory
Displays information about free and used memory on Ivanti EPMM.
This command executes the Linux command free. See Linux man pages for more information.
Example
> show memory
total used free shared buffers cached
Mem: 2135892 2065440 70452 0 146848 456292
-/+ buffers/cache: 1462300 673592
Swap: 4192956 12 4192944
show ntp status
Displays the currently configured time sources. The time sources are Network Time Protocol (NTP) servers. An NTP server figures out how much the system clock drifts and smoothly corrects it.
You can configure the NTP servers using the Ivanti EPMM System Manager in the Admin Portal, described in “Date and Time (NTP)” in the Ivanti EPMM System Manager Guide.
Example
>show ntp status
+-----------+--------------------+
Index + NTP Server +
+-----------+--------------------+
0 172.16.0.1
show processes
Displays the processes running on Ivanti EPMM.
This command executes the Linux command ps auxwww. See Linux man pages for more information.
Example
>show processes
show service
Displays the status for configured services such as SSH and NTP. You can enable SSH and set the maximum number of sessions using the Ivanti EPMM System Manager in the Admin Portal, described in “CLI” in the Ivanti EPMM System Manager Guide. For NTP, see “Date and Time (NTP)” in the same guide.
Example
>show service
+------------+-----------+---------------
Servicename + Enabled + Max.Sessions
+------------+-----------+---------------
ssh yes 5
ntp yes
show software repository
Displays the currently configured location for Ivanti EPMM software updates. This location is configured using the Ivanti EPMM System Manager in Maintenance > Software Updates.
Example
>show software repository
+------------------------------------------+---------------+-----------
Software repository Username Password
+------------------------------------------+---------------+-----------
myRepositoryServer.com RepositoryUserId
show tcp
Lists information about all active TCP ports. This information provides traffic statistics and can help identify network problems.
This command executes the Linux command netstat -nat. See Linux man pages for more information.
Example
>show tcp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 127.0.0.1:8005 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:199 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN
.
.
.
The following table describes the information displayed:
Table 8. show tcp command information display
Column heading | Description |
|---|---|
Proto | The protocol. Always TCP. |
Recv-Q | The number of bytes not copied by the user program connected to this socket. |
Send-Q | The number of bytes not acknowledged by the remote host. |
Local Address | The IP address of the local computer and the port number being used. If the port is not yet established, the port number is shown as an asterisk (*). |
Foreign Address | The IP address and port number of the remote computer to which the socket is connected. If the port is not yet established, the port number is shown as an asterisk (*). |
State | The state of the connection. Possible states are: LISTEN SYN-SENT SYN-RECEIVED ESTABLISHED FIN-WAIT-1 FIN-WAIT-2 CLOSE-WAIT CLOSING LAST-ACK TIME-WAIT |
show timeout
Displays the currently configured idle timeout for the CLI in minutes. The value 0 indicates no timeout. The timeout value is configured using the Ivanti EPMM System Manager in the Admin Portal, described in “CLI” in the Ivanti EPMM System Manager Guide.
Example
>show timeout
+---------------------------
Cli Idle Timeout in Minute(s)
+---------------------------
0
show version
Displays the currently installed version of Ivanti EPMM software.
Example
>show version
VSP 4.5.0 Build 47
timeout
Sets the idle timeout for the CLI. Enter the number of minutes between 0 and 9999.
Example
>timeout 150
You can also set the CLI idle timeout using the Ivanti EPMM System Manager in the Admin Portal, described in “CLI” in the Ivanti EPMM System Manager Guide.
traceroute
Displays the network route to the specified destination.
Specify one of the following parameters:
Table 9. traceroute command parameters
Parameter | Description |
|---|---|
hostname | The destination’s host name. |
IP address | The destination’s IP address. |
Example
>traceroute 173.194.33.43
traceroute to 173.194.33.43 (173.194.33.43), 30 hops max, 40 byte packets
1 10.10.1.1 (10.10.1.1) 4.808 ms 5.481 ms 6.112 ms
2 * * *
.
.
.
>traceroute google.com
traceroute to google.com (173.194.33.45), 30 hops max, 40 byte packets
1 10.10.1.1 (10.10.1.1) 5.268 ms 5.933 ms 6.564 ms
2 * * *
.
.
.