Windows BIOS Configuration
Administrators can set Windows BIOS settings on Lenovo devices. At least one Lenovo device that supports BIOS settings must be enrolled to set this configuration.
To configure:
- Go to Configuration > +Add.
- Select Windows BIOS configuration.
- Enter a name for the configuration.
- Enter a description.
- In the Choose device model section, select the device model from the drop down list.
- In the Configuration Setup section, configure the following options:
The list of settings vary depending on what is available for the specific device model that is enrolled. Please refer to the respective device website for more information.
Setting | What to do |
|---|---|
AMT Control | Select any of the following options:
|
Adaptive Thermal Management AC | Select any of the following options:
|
Adaptive Thermal Management Battery | Select any of the following options:
|
Always On USB | Select any of the following options:
|
BIOSPasswordAtBootDeviceList | Select any of the following options:
|
BIOS Password At Reboot | Select any of the following options:
|
BIOS Password At Unattended Boot | Select any of the following options:
|
BIOS Update By End Users | Select any of the following options:
|
Bluetooth Access | Select any of the following options:
|
Boot Device List F12 Option | Select any of the following options:
|
Boot DisplayDevice | Select any of the following options:
|
BootMode | Select any of the following options:
|
Boot Order Lock | Select any of the following options:
|
BootTimeExtension | Select any of the following options:
|
BottomCover Tamper Detected | Select any of the following options:
|
CPU Power Management | Select any of the following options:
|
Computrace Module Activation | Select any of the following options:
|
Data Execution Prevention | Select any of the following options:
|
Ethernet LAN Access | Select any of the following options:
|
Ethernet LAN Option ROM | Select any of the following options:
|
Fingerprint Password Authentication | Select any of the following options:
|
Fingerprint Pre-desktop Authentication | Select any of the following options:
|
Fingerprint Reader Access | Select any of the following options:
|
Fingerprint Reader Priority | Select any of the following options:
|
Fingerprint Security Mode | Select any of the following options:
|
Fn Ctrl Key Swap | Select any of the following options:
|
FnKeyAsPrimary | Select any of the following options:
|
FnSticky | Select any of the following options:
|
IPv4 Network Stack | Select any of the following options:
|
IPv6 Network Stack | Select any of the following options:
|
Integrated Camera Access | Select any of the following options:
|
InternalStorageTamper | Select any of the following options:
|
Keyboard Beep | Select any of the following options:
|
Lock BIOS Setting | Select any of the following options:
|
Memory Card Slot Access | Select any of the following options:
|
Microphone Access | Select any of the following options:
|
Minimum Password Length | Select any of the following options:
|
NFFControl | Select any of the following options:
|
Nfc Access | Select any of the following options:
|
On By Ac Attach | Select any of the following options:
|
PasswordBeep | Select any of the following options:
|
PasswordCountExceededError | Select any of the following options:
|
Physical Presence For Tpm Clear | Select any of the following options:
|
Physical Presence For Tpm Provision | Select any of the following options:
|
Rapid Start Technology | Select any of the following options:
|
SecureBoot | Select Enable |
Secure Roll Back Prevention | Select any of the following options:
|
Security Chip | Select any of the following options:
|
Smart Card Slot Access | Select any of the following options:
|
SpeedStep | Select any of the following options:
|
Startup Option Keys | Select any of the following options:
|
TXT Feature | Select any of the following options:
|
Total Graphics Memory | Select any of the following options:
|
TouchPad | Select any of the following options:
|
TrackPoint | Select any of the following options:
|
USB30 Mode | Select any of the following options:
|
USB BIOS Support | Select any of the following options:
|
USB Port Access | Select any of the following options:
|
Uefi Pxe Boot Priority | Select any of the following options:
|
VTd Feature | Select any of the following options:
|
Virtualisation Technology | Select any of the following options:
|
Wake On LAN | Select any of the following options:
|
Wireless LAN Access | Select any of the following options:
|
Wireless WAN Access | Select any of the following options:
|
- Click Next.
- Select one of the following distribution options:
- All Devices
- No Devices (default)
- Custom
- Click Done.
