---
title: WAN Clustering
slug: wan-clustering
createdAt: 2026-07-27T04:11:11.821Z
---

### Overview

A WAN cluster is a group of independent servers/nodes separated by WAN networks working together as a single system to provide load balancing and high scalability for clients and services. WAN cluster works only in active-active cluster operation mode and is qualified on ISA4000-V, ISA6000, ISA6000-V, ISA8000, and ISA8000-V, platforms.

Clustering supports following types of synchronization settings:

- Configuration-only Cluster - Only configuration will be synced across the cluster nodes
- Synchronize user sessions - Configuration and user session information will be synced across the Cluster nodes

:::hint{type="info"}
WAN cluster only supports Configuration-only Cluster and does not support Synchronize user sessions.
:::

### Configuring an Active-Active Configuration-only WAN Cluster

To configure an Active/Active Configuration-only WAN cluster:

1. Configure an Active/Active cluster as mentioned in the [Configuring an Active/Active or Active/Passive Cluster](docId:4UOKxBlwrU_N0gEmYjgK5)[ ](https://docs.pulsesecure.net/WebHelp/PPS/9.0R3/Home.htm#PPS_Admin_Guide/Configuring_as_Active_Active.htm)section.
2. Select **System > Clustering > Cluster Properties and select Configuration-only Cluster&#x20;**&#x61;s shown in the screen below.
   :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/fFHqPYW1iA1goN5JTvhoO_configuringanactiveactiveconfigurationonlywancluster.png" alt caption size="80" width="1461" height="707"}
3. Unde&#x72;**&#x20;Advanced Settings,&#x20;**&#x73;elec&#x74;**&#x20;Enable Advanced Settings&#x20;**&#x61;nd then select the **Network Type as Average latency 60-100ms&#x20;**&#x6F;&#x72;**&#x20;Average latency 10-60ms&#x20;**&#x66;or WAN cluster.
   :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/Wc1c45U2y3BpFyPYmZeES_enableadvancedsettings.png" alt caption size="80" width="1404" height="730"}

:::hint{type="info"}
In an Active/Active WAN cluster, if the networks of all the internal ports of the IPS/Nodes are in different subnets, it is mandatory to add specific static network routes on every IPS/Node to reach every other IPS/Node in the cluster for better cluster communication during IPS/Node failover or downtime.
:::

To add a specific static route on a IPS/Node to reach another IPS/Node in the cluster:

1. Select **System > Network > Routes**.
2. Click **New Route**
   .:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/eLHHJrW7eeT9OS-UN75dQ_thenetworktopology.png" alt caption size="80" width="1619" height="481"}
3. Based on the Network’s Topology the Static Route needs to be added on IPS/Node to reach other IPS/Node in WAN Cluster. Below is an example where static route is added on IPS Configured in 10.11.0.0/16 network having gateway 10.11.1.1 to reach another IPS/Node Configured in 10.12.0.0/16
   .:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/_Gm1DCnIJz_TNv8DwciGk_thenetworktopology1.png" alt caption size="80" width="836" height="377"}
4. The same steps need to be repeated on every IPS/Node in the Active/Active WAN cluster.
