---
title: 錯誤訊息
slug: ps/help/en_us/ics/end-user/zh/j-EMZNkaFEFEk_apo8_0f
createdAt: 2026-08-23T07:09:27.772Z
---

## Windows 應用程式錯誤訊息 (sam.windows.app)

| 系統日誌訊息 | Windows Secure Application Manager 無法解析安全閘道的主機名，必須關閉。您最初可能使用 Web 代理訪問了安全閘道。 |
| ------ | --------------------------------------------------------------------------- |
| 原因     | 您最初可能使用 Web 代理訪問了安全閘道，或者您可能設定了不正確的 DNS 伺服器。                                 |
| 動作     | 驗證 Web 代理在您的瀏覽器上設置是否正確且可訪問，並驗證 DNS 連線和解析。                                   |

| 系統日誌訊息 | 儘管 Windows Secure Application Manager 無法將您的 Web 瀏覽器引導回安全閘道首頁，但您可以繼續正常使用 Windows Secure Application Manager。 |
| ------ | ----------------------------------------------------------------------------------------------------------- |
| 原因     | 您可能暫時失去了網路連線，或者您的瀏覽器包含代理配置。                                                                                 |
| 動作     | 按一下瀏覽器中顯示的 Web「啟動應用程式」頁面上的重定向超鏈接。如果您沒有被定向到安全閘道首頁，請聯繫您的系統管理員以驗證網路連線。                                         |

| 系統日誌訊息 | Windows Secure Application Manager 已在此計算機上運行。按一下確定結束之前的工作階段並開始新的 Windows Secure Application Manager 工作階段。 |
| ------ | --------------------------------------------------------------------------------------------------------- |
| 原因     | Windows Secure Application Manager 工作階段已在此計算機上處於活動狀態。您一次不能操作多個 Windows Secure Application Manager 。       |
| 動作     | 按一下**確定**結束之前的工作階段並開始新的 Windows Secure Application Manager 工作階段。                                          |

| 系統日誌訊息 | 無法終止以前的 Windows Secure Application Manager 工作階段。              |
| ------ | ------------------------------------------------------------- |
| 原因     | 以前的 Windows Secure Application Manager 工作階段無法自動終止。            |
| 動作     | 在重新連線到安全閘道之前，手動終止現有的 Windows Secure Application Manager 工作階段。 |

| 系統日誌訊息 | Windows Secure Application Manager 安裝成功。您需要重新啟動計算機才能完成安裝過程。關閉所有應用程式以避免資料丟失，然後按一下**確定**重新啟動計算機。 |
| ------ | ---------------------------------------------------------------------------------------------- |
| 原因     | 這是一條情報訊息。                                                                                      |
| 動作     | 關閉所有應用程式以避免資料丟失，然後按一下**確定**重新啟動計算機。                                                            |

| 系統日誌訊息 | 安全閘道上已設定 Windows Secure Application Manager 檔案共用，需要自動設定驅動程序。您必須重新啟動計算機才能完成驅動程序配置。關閉所有應用程式以避免資料丟失，然後按一下「確定」重新啟動計算機。 |
| ------ | ------------------------------------------------------------------------------------------------------------------ |
| 原因     | 在安全閘道上啟用 Windows Secure Application Manager 檔案共用時，TCP/IP 和 NetBT 之間需要 neofltr.sys 驅動程序。此自動配置要求您重新啟動計算機。            |
| 動作     | 關閉所有應用程式以避免資料丟失，然後按一下「確定」重新啟動計算機。                                                                                  |

| 系統日誌訊息 | 分層服務提供程序 (LSP) 應用程式更改了 Winsock 協議目錄，改變了 Windows Secure Application Manager 應用程式順序。您需要重新啟動計算機以恢復原始應用程式順序。關閉所有應用程式以避免資料丟失，然後按一下**確定**重新啟動計算機。 |
| ------ | ------------------------------------------------------------------------------------------------------------------------------------------- |
| 原因     | 此用戶端上可能最近安裝了一個應用程式，該應用程式覆蓋了 Windows Secure Application Manager 應用程式順序。                                                                      |
| 動作     | 重新啟動計算機以重置 Windows Secure Application Manager 應用程式順序。                                                                                       |

| 系統日誌訊息 | 用戶端上安裝了以下分層服務提供程序 (LSP) 程序，可能會導致 Windows Secure Application Manager 無法正常運行:\<list of LSP programs> . 按一下**繼續**以啟動 Windows Secure Application Manager 。                                   |
| ------ | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| 原因     | Windows Secure Application Manager 檢測到其他應用程式已在您的系統上安裝了指定的分層服務提供程序程序。尚未確認這些 LSP 與 Windows Secure Application Manager 不兼容，但是，這些 LSP 程序與 Windows Secure Application Manager 之間的衝突可能會導致不利影響。 |
| 動作     | 在啟動 Windows Secure Application Manager 之前，請聯繫您的系統管理員以獲取有關處理 LSP 程序的說明。                                                                                                                   |

| 系統日誌訊息 | 用戶端上安裝了以下不兼容的分層服務提供程序 (LSP) 程序，導致 Windows Secure Application Manager 無法正常運行: \<list of LSP programs>                                                           |
| ------ | -------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| 原因     | Windows Secure Application Manager 檢測到其他應用程式已在您的系統上安裝了指定的分層服務提供程序程序。已知指定的 LSP 與 Windows Secure Application Manager 不兼容，從而導致系統不穩定。這些 LSP 通常是不符合任何安全標準的間諜軟件應用程式。 |
| 動作     | 當這些 LSP 存在時，Windows Secure Application Manager 將不會安裝或運行。有關解除安裝應用程式或以其他方式處理 LSP 的說明，請聯繫您的系統管理員。                                                                 |

| 系統日誌訊息 | 系統設定已更改。您需要重新啟動計算機才能使用 Windows Secure Application Manager。關閉所有應用程式以避免資料丟失，然後按一下**確定**重新啟動計算機。 |
| ------ | --------------------------------------------------------------------------------------------- |
| 原因     | 驅動程序無法加載，因為 Irp 堆棧大小和安裝了 McAfee 驅動程序或安裝了 Kaspersky 驅動程序。                                      |
| 動作     | 按一下**確定**重新啟動計算機。                                                                             |

| 系統日誌訊息 | Windows Secure Application Manager 無法重新啟動系統。請關閉所有應用程式並從開始功能表重新啟動系統，然後再次啟動 Windows Secure Application Manager。 |
| ------ | ------------------------------------------------------------------------------------------------------------- |
| 原因     | 您的計算機沒有自動重新啟動。                                                                                                |
| 動作     | 關閉所有應用程式並重新啟動計算機。                                                                                             |

| 系統日誌訊息 | 系統設定已更改，以便 Windows Secure Application Manager 與安裝在該系統上的其他 TDI 驅動程序進行互操作。建議您重新啟動計算機以重新加載新的驅動程序配置。關閉所有應用程式以避免資料丟失，然後按一下**確定**重新啟動計算機。 |
| ------ | ----------------------------------------------------------------------------------------------------------------------------------- |
| 原因     | 未安裝黑名單驅動程序且 Irp 堆棧大小設置不正確。                                                                                                          |
| 動作     | 您需要升級 Windows Secure Application Manager，這需要您重新啟動計算機。關閉所有應用程式以避免資料丟失，重新啟動計算機，然後再次登入安全閘道。                                            |
