---
title: Ivanti Bulk Enrollment
slug: nmdm/admin-guide/engb/vnow/ivanti-bulk-enrollment
createdAt: 2026-09-24T14:49:10.000Z
---

Administrator can enroll multiple Windows devices with generic user (via ppkg) that starts with prefix **windows-bulkenroll**, and later do the user assignment.

**Prerequisites:**

- On the Ivanti Neurons for MDM, create a user account with prefix as **windows-bulkenroll**. For example, **windows-bulkenroll**-user1\@abc.com, **windows-bulkenroll**-user2\@abc.com.

**Creating PPKG package with Windows Configuration Designer**

1. Download and install the **Windows Configuration Designer**.
2. Create new project.
3. Click on **Provision Desktop**.
4. Enter the name of the project, and select a path.
5. In the **Set up device** section, enter device name.
6. In the **Set up network** section, enter network name (to setup network, if needed or can be disabled).
7. In the **Account Management** section, select **Enroll in Local Admin**. Enter **User name** and **Password**, and click **Next**.
8. In the **Add applications** section, click **Next**.
9. In the **Add certificates** section, select **Switch to advanced editor**, and click **Proceed** > **Yes**.
10. Go to **RuntimeSettings** > **Workplace Enrollments**. Enter **UPN** (same user created on Ivanti Neurons for MDM in the prerequisites section). Select the following options: 
    - AuthPolicy: OnPremise
    - DiscoveryServiceFullUrl: https\://login.mobileiron.com
    - Secret: Enter the Password

Click **File** > **Save**.

12. Click **Export** > **Provisioning Package**.
13. Click **Next** on subsequent screens, and click **Build**.
    The ppkg file is saved in the specified location.

**Provision device in OOBE mode with ppkg**

Provision the devices with the newly created ppkg package file from the above section. Once the device gets enrolled and checkin is successful, you will find the device entry on MDM server with the user that has prefix as **windows-bulkenroll**.

**Assign Device to User**

1. On the Devices page, click the user that has a prefix as **windows-bulkenroll**.
2. Click **Assign to User**. The Assign to User window opens.
3. Select or Search for the device from the list.
4. Select the required device.
5. Click **Assign to User**. The selected device will be assigned to the user.

When the user logs into the device for first time, the password change is must.

:::hint{type="info"}
Assign to User option is available only for the Ivanti Bulk Enrolled devices.
:::

:::hint{type="info"}
Only device scope configurations and applications will work for the devices enrolled under this category. User scope configurations and applications are not supported.
:::
