---
title: Scopes
slug: neurons/help/en_us/scopes
createdAt: 2026-11-05T08:02:09.953Z
---

Navigate to **Main menu** > **Admin** > **Access Control**, the **Scopes** tabs enable you to manage access across the Ivanti Neurons Platform.

Use scopes to define which devices members can see and manage. Administrators can create a scope containing a static list of devices or they can create a scope that works dynamically based on filters.

Members can have multiple scopes assigned to them. Scope creation and assignment requires the **Access Control > Modify Scopes** permission.

Scopes currently apply to only the following areas of Ivanti Neurons platform:

- Devices
- People
- Smart Advisors
- Dashboard components that get data from Devices or People
- Remediation Insights
  This gives you more control over your devices and their visibility across Ivanti Neurons. The exposures and assets are shown to the users based on the applied Device Scope.
  For users with restricted access, an informational message will appear in the Predictive Compliance flyout, the Exposures view, and the Insights page. This message clarifies that administrator-set scopes may limit the number of assets and exposures they can see. For more information, see [Remediation Insights](docId\:GsUmz5DSxzIZ_l7saK2VQ).
- Bots (Custom Action)
  The use of Custom Actions can now be restricted using Neurons Scopes, providing enhanced security by controlling which device groups or people a bot is allowed to execute actions against, based on the scope access of the user who triggered the bot. For more information on Scope for Run now, see [Run now](docId\:xYY07BWu7SBrBwE3rfz-F).
- Patch Management
  In certain scenarios, the number of devices found in a scope may be higher than the number of devices available in Patch Management once this device scope is assigned. The icon :inlineImage[]{src="https://api.archbee.com/api/optimize/9rfvxhrv8FA-8bxcK2IRv/RpvesEjWa5ZuU5QS7hDop_scope-icon.png" alt caption size="10" width="46" height="36"} shows the information in the column is not as per specified scope. A banner also indicates this on the top of the page.
- Patch Management Reports
  Patch Management reports are generated based on the device scopes assigned.
  Learn more about [Patch Management Reports](docId\:KNruhaNgMCn03B4Ydaa17).
- Edge Intelligence (Device Scope supported)
  In certain scenarios, the number of devices found in a scope may be higher than the number of devices available in Edge Intelligence once this device scope is assigned.
  Scenarios are:
  1. When configuring a scope, the used filter criteria can result in identical devices. For an example: multiple devices with the same computer name.
  2. Not all devices have the Edge Intelligence engine or capability installed.
  3. Device being offline for longer than 30 days, which Edge Intelligence will clean up.

:::ExpandableHeading
## To create a dynamic device scope

1. Go to **Main menu** > **Admin > Access Control > Scopes**.
2. Click **Create new&#x20;**>**&#x20;Create device scope**, to open the **New Device Scope** page.
3. Enter a **Scope name**.
4. Under **Scope type**, select **Dynamic**. It's the default.
5. Under **Scope filters**, build a filter that includes the devices you want.
6. At the bottom of the page, click **Save & Close**.
:::

:::ExpandableHeading
## To create a static device scope

1. Navigate to **Admin&#x20;**>**&#x20;Access Control > Scopes**.
2. Click the scope you want to modify or click **Create New > Create Device Scope**, to open the new device scope page.
3. Enter a **Scope name**.
4. Under **Scope type**, select **Static**.
5. Click **Add devices**.
6. Click **Add** or select the box next to each device you want to include in the scope. Use the search field to filter the list.
7. Click **OK** when you have finished adding devices. The devices you selected appear in the scope's device list.
8. Click **Save & Close** on the top right of the page.
:::

:::ExpandableHeading
## To create a static people scope

1. Go to **Main menu >Admin&#x20;**>**&#x20;Access Control > Scopes**.
2. Click **Create new > Create people scope**, to open the **New People Scope** page.
3. Enter a **Scope name**.
4. Under **Scope type**, select **Static**.
5. Click **Add People**.
6. Select the checkbox next to each username you want to include in the scope. Use the search field to filter the list.
7. Click **OK** when you have finished adding devices. The users you selected appear in the scope's assigned list.
8. At the bottom of the page, click **Save & Close**.
:::

:::ExpandableHeading
## To create a dynamic people scope

1. Go to **Main menu** > **Admin > Access Control > Scopes**.
2. Click the scope you want to modify or click **Create new&#x20;**>**&#x20;Create device scope**, to open the new device scope page.
3. Enter a **Scope name**.
4. Under **Scope type**, select **Dynamic**. It's the default.
5. Under **Scope filters**, build a filter that includes the devices you want.
6. At the bottom of the page, click **Save & Close**.
:::

:::ExpandableHeading
## To assign a scope to a member

1. Navigate to **Admin&#x20;**>**&#x20;Access Control > Members**.
2. Find the person in the list and click on their **Name** to open the member **Details** page.
3. Click the **Scopes** field.
4. Click **Add Scope > Device Scope**.
5. From the **Device scopes** list, select the scopes you want to assign to the member.
6. Click **Assign scopes**.
7. When you have made the desired changes, click **Save & Close**.
:::

::::ExpandableHeading{customAnchorSlug="Remove-member-from-scope"}
## To remove a member from the scope

1. Navigate to **Admin > Access Control > Scopes**.
2. On the required scope, click :inlineImage[]{src="https://api.archbee.com/api/optimize/9rfvxhrv8FA-8bxcK2IRv/26MvvUTF3qZHwM7zkYFLC_access-control-scopes.png" alt caption size="10" width="73" height="51"} and select **Remove Members&#x20;**&#x74;o remove a member from the scope.

   :::hint{type="info"}
   If the scope is not assigned to a member, the **Remove Members** option will be disabled for that particular member.
   :::
::::

:::ExpandableHeading
## To copy a scope from a device group

1. Go to **Main menu** > **Admin** > **Access Control** > **Scopes**.
2. Click **Create New&#x20;**> **Copy from Device Group**.
   Th&#x65;**&#x20;Device Group&#x20;**&#x77;indow appears.
3. Select the desired device group or use the search box to filter out the device.
4. Click **Copy to Scope**.
   The **New Device Scope** page appears.
5. Enter th&#x65;**&#x20;Scope Name**.
6. Configure the scope as required.
7. Click **Save & Close** on the top right of the page.
:::
