---
title: SCIM Provisioning - PingOne
slug: neurons/help/en_us/scim-provisioning-pingone
createdAt: 2026-11-05T08:02:10.442Z
---

SCIM provisioning allows automated group management via the SCIM protocol. This topic explains the steps to set up SCIM provisioning using PingOne.

:::hint{type="info"}
This topic walks you through SCIM configuration for IdPs on a high level. Refer to the relevant IdP documentation for setting up SCIM provisioning based on your organization's requirements.
:::

:::hint{type="info"}
To use SCIM provisioning, ensure that external authentication is set up and is active. For more information, refer to [PingOne Authentication (SAML)](docId:16h8vk2AWj42YLxuo5BWs) and [PingOne Authentication (OIDC)](docId:2EMnt3CZB0eZu7dEnsvxm).
:::

## Configure & Enable SCIM Provisioning

::::ExpandableHeading{customAnchorSlug="Step3"}
## Step 1- Get SCIM Provisioning Parameters (Ivanti Neurons Platform)

1. In Ivanti Neurons, navigate to **Admin&#x20;**> **Authentication**.
   The **Authentication** page appears.
2. In the **SCIM Provisioning** section, click **Configure & Enable**.
   The **SCIM Configuration** page appears. This displays the credentials and URLs to set up SCIM provisioning.

:::hint{type="info"}
Do not close the SCIM Configuration page. You can copy these parameters when provisioning the configuration at [Step 4 - Create New Provisioning Configuration](docId\:BWri1bNV4BQhXLMnB8EO2).
:::
::::

:::ExpandableHeading{customAnchorSlug="Step"}
## Step 2- Creating New Connection (PingOne Console)

1. Log in to **PingOne Console** as an Administrator.
2. In the sidebar menu, expand **Integrations** and click **Provisioning**.
   The Provisioning page appears.
3. Click :inlineImage[]{src="https://api.archbee.com/api/optimize/9rfvxhrv8FA-8bxcK2IRv/Qra4SYLOEkhQUdhnYPETu_icon-pingone-new-connection.png" alt caption size="10" width="30" height="28"}(**New Connection**).
   The Create a New Connection pane appears.
4. Select the **Identity Store** option to proceed.
5. Search and select the **SCIM Outbound** option and click **Next**.
6. Enter a name and description for the connection, then click **Next**.
7. On the Configure Authentication step, select **OAuth 2 Client Credentials** from the **Authentication Method** drop-down list.
8. Copy and paste the parameters from Ivanti Neurons from [Step 1 - Get SCIM Provisioning Parameters](docId\:BWri1bNV4BQhXLMnB8EO2).
   Refer to the table below to understand the field mapping between Ivanti Neurons and PingOne Console.

| PingOne Console     | SCIM Configuration Pane (Ivanti Neurons) |
| ------------------- | ---------------------------------------- |
| SCIM BASE URL       | Neurons SCIM Url                         |
| Oauth Token Request | Neurons Auth Url                         |
| Oauth Client ID     | Client ID                                |
| Oauth Client secret | Client Secret                            |

9. Select the **Bearer** option from the **Auth Type Header** drop-down list.
10. Click **Test Connection**.
11. After a successful connection, click **Next**.
12. (Optional) On the Configure Preference step, select required options.
13. Click **Save**.
    Once saved, close this pane to view the newly created connection on the Provisioning page under the **Connections** tab.
    The connection becomes active when a rule is assigned to it. By default, the connection is disabled.
:::

::::ExpandableHeading
## Step 3 - Creating New Rule (PingOne Console)

1. On the Provisioning page, go to the **Rules** tab.
2. Click :inlineImage[]{src="https://api.archbee.com/api/optimize/9rfvxhrv8FA-8bxcK2IRv/Qra4SYLOEkhQUdhnYPETu_icon-pingone-new-connection.png" alt caption size="10" width="30" height="28"} and select **New Rule**.
   Add Rule pane appears.
3. Set the **PingOne as Source** option as the Sync Direction.
4. Search for or select the connection to add it as a target, then click **Continue**.
5. Enter a name and description for the rule on the **Rule Detail** step. Then, click **Next**.
6. On the Directory Configuration step.
   1. Click **Add Groups** under the Groups section. Select one or more groups from the list, and click **Save**.
   2. Click **Add Condition** under the User Filter section to define provisioning to users based on the condition.
      Add attributes to filter users and click **Save** to add a condition.

:::Paragraph{indent="2"}
After adding groups and conditions, a new rule is created. The pane name is updated based on the rule name.
:::

7. To enable the rule, switch the toggle to **On** in the top-right corner of the pane. Then, close the pane.
8. On the Rules tab, enable the new rule you created.
   This syncs the user groups, and you can view the sync status.
::::

::::ExpandableHeading
## Step 4 - Enable Access Control for Groups (Ivanti Neurons Platform)

To assign roles, follow these steps:

1. Navigate to **Admin** > **Access Control**.
2. Go to the **Groups** tab.
   This displays the list of existing and newly added groups.

   :::hint{type="info"}
   The **Member** column shows the number of users who have logged in from a group with roles and the number of directly invited members in that group.
   The **Population** column indicates the number of users in that group, irrespective of whether the group has been assigned a role.
   :::

   Ensure you note the following information to interpret the count under the **Member** column:

   - A group has a non-zero member count only if the group is assigned a role and the users in that group have logged in.
   - When a directly invited member (including an unaccepted invite) is a user of a group with roles, they are included in the member count.
3. On the Groups tab, you can do the following:
   - **To assign role-based access control (RBAC)**: Select the required group, then click **Assign Role to Group** option, select roles that you want to assign, and click **Save**.
   - **To authenticate member login via Ivanti Neurons**: Enable the check-box under the **Can Authenticate** column for a group, and click **Save Authentication Settings**.
   - **To deny access to all members in a group**: Disable the check-box under the **Can Authenticate** column for the group.

Once the changes are saved, the users can log in based on:

- Users from groups with the Can Authenticate option enabled can authenticate via Ivanti Neurons and log in.
- If the group has roles assigned, the Can Authenticate option will be enabled automatically. Users in groups with roles can log in and access Ivanti Neurons with those roles.
- If a group has the Can Authenticate option enabled but no roles assigned, users in that group can log in, but their access to Ivanti Neurons content is restricted.
- If the group has the Can Authenticate option disabled, users from that group will not have access to Ivanti Neurons.
- After users log in with assigned roles, the Members page will list users from groups with roles.
::::
