---
title: Optional SSL Configuration
slug: neurons-for-itsm/on-premises-help/enu/2022/optional-ssl-configuration
createdAt: 2026-07-29T18:57:04.722Z
---

:::hint{type="info"}
The Metrics Server is not compatible with SSL if your Service and Asset Manager system has Windows authentication set up.
:::

•[About the SSL Configuration](https://docs.ivanti.com/neurons-for-itsm/on-premises-help/enu/2022/optional-ssl-configuration#h3_About_the_SSL_Configuration)

•[Configuring SSL for the Configuration and Application Databases](https://docs.ivanti.com/neurons-for-itsm/on-premises-help/enu/2022/optional-ssl-configuration#h3_Configuring_SSL_for_the_HEAT_Application_Database_and_the_HEAT_Configuration_Database)

•[Configuring SSL for the Application Database Only](https://docs.ivanti.com/neurons-for-itsm/on-premises-help/enu/2022/optional-ssl-configuration#h3_Configuring_SSL_for_the_HEAT_Application_Database_Only)

### About the SSL Configuration

:::hint{type="info"}
For all fields in the System Configuration Wizard that ask for a server location, when using SSL, you must enter a fully-qualified domain name (FQDN). This is because SSL needs a certificate and the certificate authority requires an FQDN.
:::

You can configure Service and Asset Manager for SSL. This configuration is optional. There are three scenarios:

•The Service and Asset Manager application database and the configuration database both use SSL. See [Configuring SSL for the Configuration and Application Databases](https://docs.ivanti.com/neurons-for-itsm/on-premises-help/enu/2022/optional-ssl-configuration#h3_Configuring_SSL_for_the_HEAT_Application_Database_and_the_HEAT_Configuration_Database).

•The Service and Asset Manager application database uses SSL but the configuration database does not use SSL. See [Configuring SSL for the Application Database Only](https://docs.ivanti.com/neurons-for-itsm/on-premises-help/enu/2022/optional-ssl-configuration#h3_Configuring_SSL_for_the_HEAT_Application_Database_Only).

•Neither the Service and Asset Manager application database nor the configuration database uses SSL. In this scenario, do not check SSL on any of the pages of the System Configuration Wizard.

### Configuring SSL for the Configuration and Application Databases

To configure both your Service and Asset Manager application database and the configuration database to use SSL, follow all of the steps in all of these sections:

•[Before You Begin](https://docs.ivanti.com/neurons-for-itsm/on-premises-help/enu/2022/optional-ssl-configuration#h4_Before_You_Begin)

•[Configuring SSL in Microsoft IIS Manager](https://docs.ivanti.com/neurons-for-itsm/on-premises-help/enu/2022/optional-ssl-configuration#h4_Configuring_SSL_in_Microsoft_IIS_Manager)

•[Configuring SSL in the System Configuration Wizard](https://docs.ivanti.com/neurons-for-itsm/on-premises-help/enu/2022/optional-ssl-configuration#h4_Configuring_SSL_in_the_System_Configuration_Wizard)

### Before You Begin

•Ensure that https:\\\localhost:443 displays the Microsoft IIS Manager welcome page.

•Ensure that your system has a valid certificate.

### Configuring SSL in Microsoft IIS Manager

1.In Microsoft IIS Manager, navigate to **Sites > Default Web Site** and select **SSL Settings**.

2.On the **SSL Settings** page, check **Require SSL** and under client certificates, select **Ignore**.

3.Navigate to **Sites > HEAT** and select **SSL Settings**.

4.On the **SSL Settings** page, check **Require SSL** and under client certificates, select **Ignore**.

5.Navigate to **Sites > CentralConfig** and select **SSL Settings**.

6.On the **SSL Settings** page, check **Require SSL** and under client certificates, select **Ignore**.

7.Navigate to **Sites > FRSSurveyProxy** and select **SSL Settings**.  

8.On the **SSL Settings** page, check **Require SSL** and under client certificates, select **Ignore**.

9.Add an SSL port by doing the following:

:::Paragraph{indent="1"}
a. Navigate to **Sites > Default Web Site**, right click, and select **Edit Bindings...**.
:::

:::Paragraph{indent="1"}
b. Click **Add...**.
:::

:::Paragraph{indent="1"}
c. In the **Add Site Binding** dialog box, for the **Type** field, select **HTTPS** and in the **SSL certificate** field, select the certificate that you received from the certificate authority. The system automatically enters 443 for the port.
:::

:::Paragraph{indent="1"}
d. In the **IP Address** field, enter a fully-qualified domain name.
:::

:::Paragraph{indent="1"}
e. Click **OK**.
:::

10.Verify that you can access https\://*fully\_qualified\_domain\_name*.

### Configuring SSL in the System Configuration Wizard

1.In the System Configuration Wizard, on th&#x65;**&#x20;Configuration Application** page, ensure that the value in the **Configuration Server Domain Name** field uses a fully-qualified domain name. Do not use a machine name.

*Configuration Application Page*

::Image[]{src="https://api.archbee.com/api/optimize/parib0MC3hVoUNdfQdnac/Zaepg4oYHXVEpXk8Am5HR_configserverssl.png" position="flex-start" size="80" width="865" height="640" initialPath="../Resources/Images/ConfigServerSSL.png" githubPath="ISM_Install_and_Deploy_Guide/Content/Resources/Images/ConfigServerSSL.png" showCaption="false"}

2.On the bottom of the Service and Asset Manage&#x72;**&#x20;Application** page, ensure that you check **Use domain name to access Application** and enter a fully-qualified domain name for the Service and Asset Manager application server.  Do not use a machine name.

Service and Asset Manage&#x72;*&#x20;Application Page*

::Image[]{src="https://api.archbee.com/api/optimize/parib0MC3hVoUNdfQdnac/mSiWMmXgsWFc-nQSlsKrV_configureapplicationsettings2.png" position="flex-start" size="80" width="1371" height="949" initialPath="Install_Deploy_Images/configure_application_settings2.png" githubPath="ISM_Install_and_Deploy_Guide/Content/Install_Deploy_guide/Install_Deploy_Images/configure_application_settings2.png" showCaption="false"}

3.On the **Application Server Settings** page, do the following:

•Ensure that you enter the fully-qualified domain name in the **Configuration Server Location** field.

•Check **Use SSL**.

•Enter the fully-qualified domain name in the **Host Name** field.

*Application Server Settings Page.*

::Image[]{src="https://api.archbee.com/api/optimize/parib0MC3hVoUNdfQdnac/cvDIQ0F1R-l4cprnA7SXK_applicationserversettings2.png" position="flex-start" size="80" width="1376" height="948" initialPath="Install_Deploy_Images/application_server_settings2.png" githubPath="ISM_Install_and_Deploy_Guide/Content/Install_Deploy_guide/Install_Deploy_Images/application_server_settings2.png" showCaption="false"}

4.On the **Other Feature Settings** page, for the Service and Asset Manager application server, check **Use SSL**.

*Other Feature Settings Page*

::Image[]{src="https://api.archbee.com/api/optimize/parib0MC3hVoUNdfQdnac/5QnCu9_ZTDnFhrH0XkxlH_otherfeaturesettings2.png" position="flex-start" size="80" width="1376" height="946" initialPath="Install_Deploy_Images/other_feature_settings2.png" githubPath="ISM_Install_and_Deploy_Guide/Content/Install_Deploy_guide/Install_Deploy_Images/other_feature_settings2.png" showCaption="false"}

5.On the **Metrics Server&#x20;**&#x70;age, check **Use SSL**.

*Metrics Server Page*

::Image[]{src="https://api.archbee.com/api/optimize/parib0MC3hVoUNdfQdnac/hJolK0KmhhY3DZNfcJSo2_metrics-ssl.png" position="flex-start" size="80" width="865" height="640" initialPath="Install_Deploy_Images/Metrics-SSL.png" githubPath="ISM_Install_and_Deploy_Guide/Content/Install_Deploy_guide/Install_Deploy_Images/Metrics-SSL.png" showCaption="false"}

### Configuring SSL for the Application Database Only

To configure your Service and Asset Manager application database to use SSL but not the configuration database, follow all of the steps in all three sections:

•[Before You Begin](https://docs.ivanti.com/neurons-for-itsm/on-premises-help/enu/2022/optional-ssl-configuration#h4_Before_You_Begin2)

•[Configuring SSL in Microsoft IIS Manager](https://docs.ivanti.com/neurons-for-itsm/on-premises-help/enu/2022/optional-ssl-configuration#h4_Configuring_SSL_in_Microsoft_IIS_Manager2)

•[Configuring SSL in the System Configuration Wizard](https://docs.ivanti.com/neurons-for-itsm/on-premises-help/enu/2022/optional-ssl-configuration#h4_Configuring_SSL_in_the_System_Configuration_Wizard2)

### Before You Begin

•Ensure that https:\\\localhost:443 displays the Microsoft IIS Manager welcome page.

•Ensure that your system has a valid certificate.

### Configuring SSL in Microsoft IIS Manager

1.In Microsoft IIS Manager, navigate to **Sites > Default Web Site** and select **SSL Settings**

2.On the **SSL Settings** page, ensure that **Require SSL** is not checked. Under client certificates, select **Ignore**.

3.Navigate to **Sites > HEAT** and select **SSL Settings**.

4.On the **SSL Settings** page, check **Require SSL** and under client certificates, select **Ignore**.

5.Navigate to **Sites > CentralConfig** and select **SSL Settings**.

6.On the **SSL Settings** page, ensure that **Require SSL** is not checked. Under client certificates, select **Ignore**.

7.Navigate to **Sites > FRSSurveyProxy** and select **SSL Settings**.

8.On the **SSL Settings** page, check **Require SSL** and under client certificates, select **Ignore**.

9.Add an **SSL** port by doing the following:

:::Paragraph{indent="1"}
a. Navigate to **Sites > Default Web Site**, right click, and select **Edit Bindings...**.
:::

:::Paragraph{indent="1"}
b. Click **Add...**.
:::

:::Paragraph{indent="1"}
c. In the **Add Site Binding** dialog box, for the **Type** field, select **HTTPS** and in the **SSL certificate** field, select the certificate that you received from the certificate authority. The system automatically enters 443 for the port.
:::

:::Paragraph{indent="1"}
d. In the SSL certificate field, enter a fully-qualified domain name.
:::

:::Paragraph{indent="1"}
e. Click **OK**.
:::

10.Verify that you can access https\://*local\_host*.

### Configuring SSL in the System Configuration Wizard

1.In the System Configuration Wizard, on the Service and Asset Manage&#x72;**&#x20;Application** page, ensure that the Service and Asset Manager application database uses a fully-qualified domain name and not a machine name.

Service and Asset Manage&#x72;*&#x20;Application Page*

::Image[]{src="https://api.archbee.com/api/optimize/parib0MC3hVoUNdfQdnac/qwEsikE0vFNfdkbzzYyTU_servicemanagerapplication.png" position="flex-start" size="80" width="1371" height="949" initialPath="Install_Deploy_Images/service_manager_application.png" githubPath="ISM_Install_and_Deploy_Guide/Content/Install_Deploy_guide/Install_Deploy_Images/service_manager_application.png" showCaption="false"}

2.On the **Application Server Settings** page, do the following:

•Ensure that **Use SSL** is not checked.

•Ensure that you enter the fully-qualified domain name in the **Configuration Server Location** field.

•Ensure that you enter the host name, and not the fully-qualified domain name, in the **Host Name** field.

*Application Server Settings Page*

::Image[]{src="https://api.archbee.com/api/optimize/parib0MC3hVoUNdfQdnac/cvDIQ0F1R-l4cprnA7SXK_applicationserversettings2.png" position="flex-start" size="80" width="1376" height="948" initialPath="Install_Deploy_Images/application_server_settings2.png" githubPath="ISM_Install_and_Deploy_Guide/Content/Install_Deploy_guide/Install_Deploy_Images/application_server_settings2.png" showCaption="false"}

3.On the **Other Feature Settings** page, check **Use SSL**.

:::hint{type="info"}
This is the *only* place in the System Configuration Wizard where you check **Use SSL**. Do *not* check **Use SSL** on any other page.
:::

*Other Feature Settings Page*

::Image[]{src="https://api.archbee.com/api/optimize/parib0MC3hVoUNdfQdnac/5QnCu9_ZTDnFhrH0XkxlH_otherfeaturesettings2.png" position="flex-start" size="80" width="1376" height="946" initialPath="Install_Deploy_Images/other_feature_settings2.png" githubPath="ISM_Install_and_Deploy_Guide/Content/Install_Deploy_guide/Install_Deploy_Images/other_feature_settings2.png" showCaption="false"}
