---
title: Network: Interfaces
slug: epmm/system-manager-guide/network-interfaces
createdAt: 2026-10-06T07:58:36.119Z
---

Use the <font color="#323232">Settings &gt; Network &gt; Interfaces</font> menu options to change parameters for the following network interface points for Ivanti EPMM:

- **Physical interfaces**: are configured as part of the installation process.
- **Virtual Local Area Network (VLAN)** **interfaces**: are optional interfaces you can configure on Ivanti EPMM to manage bandwidth and load balancing.

This section includes the following topics:

- [Physical interface mapping to M2600 NIC ports](docId\:qgnzh98Qc7lf32akb6ecl)
- [Changing physical interfaces](docId\:qgnzh98Qc7lf32akb6ecl)
- [Modify Interface window field description](docId\:qgnzh98Qc7lf32akb6ecl)
- [Adding VLAN interfaces](docId\:qgnzh98Qc7lf32akb6ecl)
- [Add VLAN window field description](docId\:qgnzh98Qc7lf32akb6ecl)
- [Deleting a VLAN interface](docId\:qgnzh98Qc7lf32akb6ecl)

## Physical interface mapping to M2600 NIC ports

The following table provides a mapping of the physical interface name in the Ivanti EPMM System Manager to the physical NIC port in the M2600 appliance.

Table: Physical interface mapping to M2600 NIC ports

| Physical interface | M2600 NIC port   |
| ------------------ | ---------------- |
| GigabitEthernet1   | I - eth0 (NIC-3) |
| GigabitEthernet2   | J - eth1 (NIC-4) |
| GigabitEthernet3   | K- eth2 (NIC-5)  |
| GigabitEthernet4   | L- eth3 (NIC-6)  |
| GigabitEthernet5   | C- eth4 (NIC-1)  |
| GigabitEthernet6   | D- eth5 (NIC-2)  |

## Changing physical interfaces

**Procedure&#xA0;**

1. In the Ivanti EPMM System Manager, go to **Settings > Network > Interfaces**.
2. Click the interface name in the **Physical Interfaces** group to open the **Modify Interface** window.
3. Modify one or more of the interface fields, as necessary.
   Refer to the [Modify Interface window field description](docId\:qgnzh98Qc7lf32akb6ecl) table for details.
4. Click **Apply > OK&#x20;**&#x74;o save the changes.

## Modify Interface window field description

The following table summarizes fields and descriptions in the **Modify Interface** window:

Table: Modify Interface window field description

| Fields                                                                | Description                                                                                                                                                                                                          |
| --------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| <font color="#323232">IP</font>                                       | Enter the IP address of the physical network interface.<br />Unless you are configuring a standalone implementation for a small trial, you should specify at least one physical interface.                           |
| Mask                                                                  | Enter the netmask of the physical network interface.                                                                                                                                                                 |
| <font color="#323232">ACL</font> <font color="#323232">Name</font>    | Select an Access Control List for this interface.                                                                                                                                                                    |
| <font color="#323232">Admin</font> <font color="#323232">State</font> | To enable this interface for use with the Ivanti system, click <font color="#323232">Enable</font>. To temporarily prevent use of this interface with the Ivanti system, click <font color="#323232">Disable</font>. |

## Adding VLAN interfaces

The following describes how to add a VLAN interface.

**Procedure&#xA0;**

1. In the Ivanti EPMM System Manager, go to **Settings&#x20;**> **Network&#x20;**> **Interfaces**.
2. Go to the VLAN Interfaces group.
3. Click <font color="#323232">**Add**</font> to open the **Add VLAN** window.
4. Configure the VLAN interface, as necessary.
   Refer to the [Add VLAN window field description](docId\:qgnzh98Qc7lf32akb6ecl) table for details.
5. Click **Apply&#x20;**> **OK&#x20;**&#x74;o save the changes.

## Add VLAN window field description

The following table summarizes fields and descriptions in the **Add VLAN** window:

Table: VLAN window field description

| Fields                                | Description                                                                                                                                               |
| ------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------- |
| VLAN ID                               | Specify a number between 2 and 4094.                                                                                                                      |
| IP Address                            | Enter the IP address for this VLAN interface.                                                                                                             |
| Mask                                  | Enter the netmask for this VLAN interface.                                                                                                                |
| Physical Interface                    | Select the physical interface that corresponds to this VLAN interface.                                                                                    |
| <font color="#323232">ACL Name</font> | Select an Access Control List for this interface. See [Portal ACLs window](docId\:M-ACyzVqVQtR_cbzTE5aJ).                                                 |
| Admin State                           | To enable this interface, click <font color="#323232">Enable</font>. To temporarily suspend use of this VLAN, click <font color="#323232">Disable</font>. |

## Deleting a VLAN interface

The following describes how to delete a Virtual Local Area Network (VLAN) interface:

**Procedure&#xA0;**

1. In the Ivanti EPMM System Manager, go to **Settings > Network > Interfaces**.
2. Go to the **VLAN Interfaces group**.
3. Select the VLAN you want to remove.
4. Click <font color="#323232">**Delete** &gt; **Yes**</font>.