---
title: M2250 Series appliance
slug: epmm/on-premise/installation-guide/m2250-series-appliance
createdAt: 2026-10-06T07:51:54.244Z
---
The Ivanti EPMM appliance is a tightly integrated hardware, OS, application, and database solution that is built, optimized, and certified by Ivanti . The M2250 appliance ships with either Ivanti EPMM 10.1.0.0 or Ivanti Sentry 9.5 preinstalled. The following table lists the M2250 appliance specifications.
Table: Ivanti EPMM M2250 Series appliance specifications
| | | |
| -------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Operating environment**
| Processor | 3.8 GHz Intel E3-1275 v6 CPU |
| Memory | 32 GB | |
| Drives | 2 x 600 GB Hot-swap SAS3
12 GB/s SAS
HW RAID | |
| **Chassis**
| Form Factor | 19” 1U Rackmount |
| Dimensions (D x H x W) | 19.8” x 1.7” x 17.2” (503 mm x 43 mm x 437 mm) | |
| Weight | 32 lbs (16.5 kg) | |
| **Front panel**
| Buttons | Power On/Off
System Reset |
| LEDs | Power LED
Hard Drive Activity LED
2x Network Activity LED
System Overheat LED | |
| USB | 2x USB Ports | |
| Drives | 600 GB Hot swap SAS
12.0 GB Hard Drives (RAID1)
1x Slim DVD Drive | |
| **Back panel**
| IPMI | Intelligent Platform Management Interface (IPMI) 2.0 with virtual media over LAN and KVM-over-LAN support; 1x 10/100BASE-T (RJ45) |
| Ethernet | 2x 10/100/1000BASE-T (RJ45) | |
| VGA | 1x VGA (DB15) | |
| USB | 4x USB Ports | |
| Serial | 1x Serial port (DB9) | |
| **Power supply**
| Power | 400W (1+1) Redundant Gold-level power supply with PMBus and I2C |
| Voltage | 100 – 240V, 50-60Hz, 6-3A
+5V standby\: 3A
+12V\: 33A
+5V\: 25A
-12V\: 0.6A | |
| Connector | IEC 60320-C13 | |
| **Operating environment**
| Operating | Temperature\: 50°F to 95°F (10°C to 35°C)
Relative Humidity\: 8% to 90% (non-condensing)
Approximate maximum heat dissipation under normal operation based on Ivanti EPMM’s configuration: 1262 BTU/hr |
| Non-Operating | Temperature\: -40° to 158°F (-40° to 70°C)
Relative Humidity\: 5% to 95% (non-condensing) | |
## M2250: front panel
The following figure, key, and LED table describe the M2250 front panel.
Figure: M2250 front panel
M2250 front panel key:
1. 600G HDDs
2. n/a
3. USB ports
4. Serial port
5. Informational LED
6. NIC-2 Activity LED
7. NIC-1 Activity LED
8. HDD Activity LED
9. Power LED
10. Reset button
11. Power button
Table: Informational LED Fields
| LED status | Description |
| ------------------------ | ---------------------------------------------------------------------------------------------------- |
| Solid red | An overheat condition has occurred. This may be caused by cable congestion. |
| Blinking red (1Hz) | A fan failure has occurred. Check for an inoperative fan. |
| Blinking red (0.25Hz) | A power failure has occurred. Check for a non-operational power supply |
| Solid blue | Location UID has been activated. Use this function to locate the server in a rack-mount environment. |
| Blinking blue (300 msec) | Remote UID is on. Use this function to identify the server from a remote location. |
## M2250: back panel
The following figure and key describe the M2250 back panel.
Figure: M2250 back panel
M2250 back panel key:
1. Power supply
2. Power supply
3. COM port
4. IPMI LAN
5. USB ports
6. USB ports
7. LAN1 port
8. LAN2 port
9. VGA port