---
title: Configuring Cisco 3850 WLC
slug: configuring-cisco-3850-wlc
createdAt: 2026-07-27T04:11:11.704Z
---

### Configuring Cisco WLC using Web GUI

You can configure CISCO WLC 3850 by performing the steps as stated below:

1. Create a RADIUS server.
2. Create a Radius Server Group and map with the newly created RADIUS server
3. Create an Authentication list and map with the newly created Radius Server Group.
4. Create an Accounting list and map with the newly created Radius Server Group.
5. Create an Authorization list and map with the newly created Radius Server Group.
6. Create a Webauth Parameter Map
7. Create an Access List
8. Create a Sequence Number
9. Create a Wireless SSID

To configure the CISCO WLC 3850:

1. Login to CISCO WLC. The CISCO Wireless Controller home page appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/zcAE3sPky8TFYG99cWea1_ciscowirelesscontrollerhomepage.png" alt caption size="80" width="1579" height="795"}
2. From the **Configuration**, drop-down list select **Security**. The options under the **Security&#x20;**&#x73;ection are displayed.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/hoMYHdp8I8qL9tFwWquiz_securitysection.png" alt caption size="80" width="995" height="641"}
3. Select **AAA > Radius > Servers** to create a Radius server. The Radius Server screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/5YAUuQ_wOjaSQ5-9YxJz2_radiusservers.png" alt caption size="80" width="1141" height="687"}
4. Click **New** to create a Radius server.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/R3ULeUikuwVQRIxKNHG1f_creatingaradiusserver.png" alt caption size="80" width="1601" height="473"}
5. Enter relevant details and click Apply at the right top corner of the page. A new RADIUS server is created.
6. Select **AAA > Server Groups > Radius&#x20;**&#x74;o create a Radius Server Group. The Radius Server Groups screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/IxTOUpayXGgo424EvCygD_radiusservergroups.png" alt caption size="80" width="1194" height="486"}
7. Click **New the Radius Server Group > New** screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/rTguBaUgjGGOzA_5_uYrt_creatingaradiusservergroup.png" alt caption size="80" width="1586" height="538"}
8. Enter a name in the Name field. From the Available Servers box select the server which you have created in step 5 and click the button :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/BFys3Oujb-cglOGfma7Jj_movebutton.png" alt caption size="10" width="32" height="23"} to move it to the Assigned Servers box.
9. Click Apply to save the Radius Server Group.
10. Select **AAA > Method List > Authentication&#x20;**&#x74;o create an Authentication list.
    The Authentication screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/L82ZhKPInHBnarCs9fk-x_authenticationlist.png" alt caption size="80" width="1310" height="536"}
11. Click **New**. The **Authentication > New&#x20;**&#x73;creen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/wbmPTKl_05TLbObXdaDC7_creatinganewauthenticationlist.png" alt caption size="80" width="1600" height="523"}
12. Enter the details in the fields as follows:
    - In the Method List Name field enter webauth\_radius
    - For Type, select login
    - For Group Type select group
    - Select the ‘wirelessradius’ server group that you have created earlier from the Available Server Groups box and click :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/BFys3Oujb-cglOGfma7Jj_movebutton.png" alt caption size="10" width="32" height="23"} to move it to the Assigned Server Groups box.
13. Click **Apply** to save the Authentication.
14. Select **AAA > Method List > Accounting&#x20;**&#x74;o create an Accounting list. The Accounting screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/OdrbgTk8XgkNgWqqF4trj_accountinglist.png" alt caption size="80" width="1160" height="496"}
15. Click **New** to create an Accounting list. The **Accounting > New** screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/vyxj_4vxc7W57bBj9q_Ze_creatinganaccountinglist.png" alt caption size="80" width="1600" height="524"}
16. Enter the details in the fields as follows:
    - In the Method List Name field enter webauth\_radius.
    - For Type, select network.
    - Select the ‘wirelessradius’ server group that you have created earlier from the Available Server Groups box and click :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/BFys3Oujb-cglOGfma7Jj_movebutton.png" alt caption size="10" width="32" height="23"} to move it to the Assigned Server Groups box.
    - Click Apply to save the Accounting list.
17. Select **AAA > Method Lists > Authorization** to create an Authorization list. The Authorization screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/J1AtpYnphbAawzIGwpIfz_authorizationlist.png" alt caption size="80" width="1254" height="454"}
18. Click **New** to create an Authorization list. The **New screen** appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/Q401Np3n5uaM47wiXHwdf_creatinganauthorizationlist.png" alt caption size="80" width="1600" height="559"}
19. Enter the details in the fields as follows:
    - In the Method List Name field enter webauth\_radius.
    - For Type, select network.
    - For Group Type select group.
    - Select the ‘wirelessradius’ server group that you have created earlier from the Available Server Groups box and click :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/BFys3Oujb-cglOGfma7Jj_movebutton.png" alt caption size="10" width="32" height="23"} to move it to the Assigned Server Groups box.
20. Click Apply to save the Authorization list.
21. Select Web Auth > Webauth Parameter Map to create a Webauth Parameter Map. The Webauth Parameter Map screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/Jv8ol7Y5KFZRXebXsJWq4_webauthparametermap.png" alt caption size="80" width="1144" height="683"}
22. Click **New** to create a Webauth Parameter Map. The **Webauth Parameter Map > New** screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/a4w50k0-MoYapXMOtrihs_creatingawebauthparametermap.png" alt caption size="80" width="1579" height="924"}
23. Enter the details in the fields as follows:
    - In the Parameter – map name field enter vt\_web.
    - In Maximum HTTP connections (1-200) enter 30.
    - In Init-State Timeout (60-3932100 in seconds) enter 120.
    - In Fin-Wait Timeout (1-2147483647 in millisecond) enter 3000.
    - In Redirect for login field enter https\://10.204.89.165/guest - This is the IPS URL to which a guest is redirected when tried to access a website.
    - In Portal IPv4 address enter 10.204.89.165.
24. Click **Apply** to save the Webauth Parameter Map.

:::hint{type="info"}
A default Webauth Parameter Map is created a shown in the following figure.
:::

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/v1TltZ0S8GuAFjlks_t_v_defaultwebauthparametermap.png" position="flex-start" size="80" width="1104" height="1083" initialPath="images/default_webauth_parameter_map.png" githubPath="images/default_webauth_parameter_map.png" showCaption="false"}

25. Select **ACL > Access Control List** to create an Access Control List. The Access Control Lists screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/crsNR5od_sEU4f6tUh8zt_accesscontrollist.png" alt caption size="80" width="1033" height="450"}
26. Click **Add New**. The New Access List screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/sJ5M1BHnbbAz-6sHMy0ud_creatinganaccesscontrollist.png" alt caption size="80" width="1585" height="330"}
27. In the Name field enter **REDIRECT-ACL**, and then click **Apply** at the right top corner. The **New Sequence Number** screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/EOh43BKmGjK8nzU3D3FWO_creatingasequencenumber.png" alt caption size="80" width="1588" height="453"}
28. Enter relevant details and click **Apply**. Allow traffic to the Ivanti Policy server IP address - 10.204.89.165.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/7QYJ_CuqAD6xV0a9s3x8d_connectingwithivantipolicyserveripaddress.png" alt caption size="80" width="1275" height="513"}
29. On the main menu select **Configuration > Wireless to create a Wireless SSID**. The WLANs screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/-Q4JjdZGBqIV7yqx2ndtu_wlans.png" alt caption size="80" width="1318" height="328"}
30. Click **New**. The **WLANs > Create New** screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/QCYI6yvAq_z4pHQwgqxLn_creatingawlan2.png" alt caption size="80" width="954" height="318"}
31. Click **Apply**. The WLAN is created and displayed in WLANs screen.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/8dnWxxXh2EP2S9HQ4R9cx_newlycreatedwlan.png" alt caption size="80" width="1318" height="328"}
32. Click the WLAN to configure. The General tab options of the WLAN appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/dnbWVm27eKLIIAW2pcN8m_wlangeneralscreen.png" alt caption size="80" width="1600" height="469"}
33. Select the options as shown in figure and then click **Apply** to save the configurations.
34. Click the **Security** tab. The options under **Security > Layer2** appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/zxbaliXk7kglRWiMjpXPZ_wlansecuritylayer2.png" alt caption size="80" width="1565" height="350"}
35. Select the options as shown in figure and then click Apply to save the configurations.
36. Click **Layer3** The options under Layer3 appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/ffoWl9jZZwqZp3rRmP5du_wlansecuritylayer3.png" alt caption size="80" width="1577" height="376"}
37. Select the options:
38. For Webauth Authentication List select ‘webauth\_radius’ which you have created earlier.
39. For Preauthentication IPv4 ACL select ‘REDIRECT-ACL’ which you have created earlier.
40. Click Apply to save the configurations.
41. Click **AAA Server**.
    The options under AAA Server appears.

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/Tu_QY9I-NwRDiFUDhDAnJ_wlansecurityaaaserverremoteapmode.png" position="flex-start" size="80" width="1581" height="331" initialPath="images/wlan_security_aaa_server_remote_ap_mode.png" githubPath="images/wlan_security_aaa_server_remote_ap_mode.png" showCaption="false"}

42. From the Accounting Method drop-down list select ‘webauth\_radius’ which you have created earlier. Click **Apply** to save the configurations.
43. Click **Advanced**.
    The options under Advanced appears.

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/KURqtt4mSH_uTLQbXUkxG_wlanadvancedsettingsremoteapmode.png" position="flex-start" size="80" width="1579" height="795" initialPath="images/wlan_advanced_settings_remote_ap_mode.png" githubPath="images/wlan_advanced_settings_remote_ap_mode.png" showCaption="false"}

44. Select the check box Allow AAA Override, so that radius attribute sent from IPS can be applied. Select other options as shown in the above figure and then click Apply to save the configurations.
