---
title: Configuring Agentless Host Checking with Native Supplicant
slug: configuring-agentless-host-checking-with-native-supplicant
createdAt: 2026-07-27T04:11:10.517Z
---

The access control for this use case can be achieved through RADIUS CoA and a sample workflow is described below:

1. The native supplicant performs 802.1X authentication and IPS creates a session. The IPS assigns a limited access role since the host check is not performed.
2. The user configures the RADIUS URL-redirection attributes on the Cisco Switch. Using RADIUS URL-Redirection return attributes the Cisco switch redirects any initial HTTP/s traffic to IPS so that Layer 3 authentication is performed along with compliance check. Upon successful Host Check, a different set of radius attributes is pushed using Radius CoA to seamlessly access any resource.
   You must configure the following return attributes (supported only on Cisco switches):
   The following figure shows a sample IPS configuration for URL-redirection on Cisco switch.

```bash
Cisco-AVPAIR=url-redirect=https://<IPS-SIGN-IN-URL>/
```

```bash
Cisco-AVPAIR=url-redirect-acl=REDIRECT_To_IPS
```

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/I9k29MKtXQu7yKLkRboWJ_radiusurlredirectiononciscoswitch.png" position="flex-start" size="80" width="1149" height="815" initialPath="images/radius_url_redirection_on_cisco_switch.png" githubPath="images/radius_url_redirection_on_cisco_switch.png" showCaption="false"}

1. The user configures the RADIUS CoA attributes. The recommended radius return attribute to perform access control using RADIUS CoA is Filter-ID for wired devices and ACL-name for WLC.
   You must configure the following return attributes on IPS:
   The following figure shows a sample IPS configuration for RADIUS CoA.

```bash
Cisco-AVPAIR=subscriber:reauthenticate-type=last
```

```bash
CiscoAVPAIR=subscriber:command=reauthenticate
```

```bash
Filter-Id=PERMIT-ALL.in
```

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/-hYj896jXUDbLybMv6oXA_radiusreturnattributeforcoa.png" position="flex-start" size="80" width="1149" height="671" initialPath="images/radius_return_attribute_for_coa.png" githubPath="images/radius_return_attribute_for_coa.png" showCaption="false"}

1. The agentless L3 authentication is done through web browser and host check is performed. If host check passes the user receives new role (for example, full-access), which provides full access to authorized resources.

:::hint{type="info"}
\- The L2 and L3 connections are merged and the merged session receives full-access role.
\- The change of role triggers new RADIUS return attribute policy. The new policy triggers RADIUS CoA and applies new radius attribute, which provides full access to authorized resources.
\- VLAN change using CoA is not supported with Cisco Switches. It is recommended to use RADIUS disconnect for VLAN change.
\- The RADIUS CoA configuration for various Cisco switch platforms is described below.
:::

| Cisco Platform | IOS Version | RADIUS CoA Configuration                                                                                                            |
| -------------- | ----------- | ----------------------------------------------------------------------------------------------------------------------------------- |
| 3850           | 16.3        | Filter-Id=PERMIT-ALL.in                                                                                                             |
| 2960X          | 15.2        | Filter-Id=PERMIT-ALL.in                                                                                                             |
| 2960           | 12.2        | Filter-Id=PERMIT-ALL.in<br />Cisco-AVPAIR=subscriber\:command=reauthenticate<br />Cisco-AVPAIR=subscriber\:reauthenticate-type=last |
|                |             |                                                                                                                                     |
|                |             |                                                                                                                                     |

