---
title: JITC Mode Option
slug: ag-25x/jitc-mode-option
createdAt: 2026-07-27T04:11:11.874Z
---

To enable the Joint Interoperability Test Command (JITC) mode:

1. Select **System > Configuration > Security > Inbound SSL Options**.
2. Under **DOD certification** option, enabl&#x65;**&#x20;Turn on JITC&#x20;**&#x6D;ode. :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/hryeXVcWmiJxO9zqZy1cV_jitcmode.png" alt caption size="80" width="1812" height="520"}

:::hint{type="info"}
NDcPP and FIPS mode are automatically enabled after enabling the **JITC mode**.
:::

3. Click **Save Changes**.
4. With JITC mode enabled, IPS detects any duplicate RADIUS Return and Request Attribute policies and an error message is displayed if the user tries to create a duplicate policy.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/nQYFUseCZuF8yzRMtzVkL_radiusreturnrequestattributepolicy.png" alt caption size="80" width="1577" height="817"}

:::hint{type="info"}
With JITC mode enabled, only the first match duplicate RADIUS policy found is reported in the error message.
:::

### Important Factors to Consider

**Password Strengthening**: When JITC is enabled, IPS does not allow an administrator to configure a password exactly same as previously configured 5 passwords. An error message is displayed in this case.

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/G5G90TP9XWkTMpZx6ybD6_passwordstrenghtening.png" position="flex-start" size="80" width="1324" height="567" initialPath="images/password_strenghtening.png" githubPath="images/password_strenghtening.png" showCaption="false"}

**Notification for Unsuccessful Admin Login Attempts:** With JITC Mode on, IPS shows a banner with the countof unsuccessful login attempts. This includes any change in the Admin status that would have happened since thelast successful login. Upon clicking on the banner, the Administrator is directed to the status page, which provides more details about status or configuration change since last login. These configuration changes are cleared before the next login so that admin can see different set of configuration changes, if anything happened from the last login.

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/f_Eh4kh7jAv5cELYN_7YF_bannerforunsuccessfuladminloginattempts.png" position="flex-start" size="80" width="1335" height="263" initialPath="images/banner_for_unsuccessful_admin_login_attempts.png" githubPath="images/banner_for_unsuccessful_admin_login_attempts.png" showCaption="false"}

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/ymS-7pK82vMtchYNnwS7b_adminnotificationforunsuccessfuladminloginattempts.png" position="flex-start" size="80" width="1342" height="191" initialPath="images/admin_notification_for_unsuccessful_admin_login_attempts.png" githubPath="images/admin_notification_for_unsuccessful_admin_login_attempts.png" showCaption="false"}

**Re-authentication of Admin Users:&#x20;**&#x49;PS will force the administrator to re-authenticate with IPS whenever the following conditions occur:

- Add Role
- Delete Role
- Modify the Role
- Delete the Realm
- Update the Realm
- During DPE (Dynamic Policy Evaluation)

**Configuration Change Notification:&#x20;**&#x46;or details about configuration changes and status information since last login, go to **System > Status >Admin Notification.**

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/pr95515Xh5-lDMpsNRSlo_configurationchangenotificationforadminusers.png" position="flex-start" size="80" width="1376" height="579" initialPath="images/configuration_change_notification_for_admin_users.png" githubPath="images/configuration_change_notification_for_admin_users.png" showCaption="false"}

### NDcPP Mode Option

NDcPP mode can be enabled in the Inbound tab with a checkbox. This status is also applied over to the Outbound tab. Turning on NDcPP automatically turns on FIPS mode. Also, NDcPP Mode allows to choose only 16 Ciphers under Custom Encryption Strength. Turning on the NDcPP checkbox selects all the NDcPP ciphers by default on both, the Inbound and Outbound sides.

### syslog-ng server

Connection to syslog-ng server does NOT get established, since syslog-ng does not support TLSv1.2.

### rsyslog

Supports only till TLSv1.1 . So, connection would not get established, if Outbound SSL Options is set to use TLSv1.2.

:::hint{type="info"}
\- To be NDcPP compliant, NTP Update Interval needs to be limited to 60 minutes. This is to avoid the potential drift becoming too excessive.
\- For incoming client certificate during client certificate authentication and for incoming server certificate during backend syslog server connection 1024 bit Key Length is not allowed in both NDcPP and FIPS Mode where as SHA1 Signature Algorithm is not allowed only in FIPS Mode and is allowed in NDcPP Mode. This restriction is not applicable for Outgoing Certificates from IPS during SSL Negotiation.
:::

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/Nop1-QFnjBm6mOzIluBZk_configurationchangenotificationforadminusers1.png" position="flex-start" size="80" width="1378" height="575" initialPath="images/configuration_change_notification_for_admin_users_1.png" githubPath="images/configuration_change_notification_for_admin_users_1.png" showCaption="false"}

### Inbound Settings

When the NDcPP mode is enabled, the following settings appear by default in the Inbound SSL Options page:

- The **Accept only TLS 1.2 and later** is enabled by default in the Allowed SSL and TLS Version settings. Only the **Accept only TLS 1.2 and later** and **Accept only TLS 1.3** options can be chosen.
- With regards to the Allowed Encryption Strength settings the Custom SSL Cipher Selection is enabled by default with NDcPP Ciphers. All other options are disabled.

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/kAp6BuU0diJqS2xlS7mq4_image1.png" position="flex-start" size="80" width="1825" height="600" initialPath="resources/images/image1.png" githubPath="resources/images/image1.png" showCaption="false"}

The following is a list of Selected Ciphers in the Inbound Settings with the NDcPP mode enabled:

- TLS AES 256 GCM SHA384
- TLS AES 128 GCM SHA256
- TLS\_ECDHE\_ECDSA\_WITH\_AES\_256\_GCM\_SHA384
- TLS\_ECDHE\_RSA\_WITH\_AES\_256\_GCM\_SHA384
- TLS\_ECDHE\_ECDSA\_WITH\_AES\_128\_GCM\_SHA256
- TLS\_ECDHE\_RSA\_WITH\_AES\_128\_GCM\_SHA256

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/wGNkesaRws7PTdtdLjo-V_image2.png" position="flex-start" size="80" width="1366" height="416" initialPath="resources/images/image2.png" githubPath="resources/images/image2.png" showCaption="false"}

### Outbound Settings

When the NDcPP mode is enabled, the following settings appear by default in the Outbound SSL Options page:

- The **Accept only TLS 1.2** and later is enabled by default in the Allowed SSL and TLS Version settings. Only the **Accept only TLS 1.2 and later** and **Accept only TLS 1.3** options are editable.
- With regards to the Allowed Encryption Strength settings the Custom SSL Cipher Selection is enabled by default. All other options are disabled.
- Only the NDcPP ciphers configured in the Outbound SSL options settings are sent in the Outbound connections (IPS —> backend SSL).

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/zqbTNKqQuThIXm9N6ZQNk_image3.png" position="flex-start" size="80" width="1424" height="866" initialPath="resources/images/image3.png" githubPath="resources/images/image3.png" showCaption="false"}

The following is a list of Selected Ciphers in the Outbound Settings with the NDcPP mode enabled:

- TLS AES\_256\_GCM\_SHA384
- TLS\_AES\_128\_GCM\_SHA256
- TLS\_ECDHE\_ECDSA\_WITH\_AES\_256\_GCM\_SHA384
- TLS\_ECDHE\_RSA\_WITH\_AES\_256\_GCM\_SHA384
- TLS\_ECDHE\_ECDSA\_WITH\_AES\_128\_GCM\_SHA256
- TLS\_ECDHE\_RSA\_WITH\_AES\_128\_GCM\_SHA256

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/tc-iViUqXZ2N6jQYY46j2_image4.png" position="flex-start" size="80" width="1112" height="420" initialPath="resources/images/image4.png" githubPath="resources/images/image4.png" showCaption="false"}
