---
title: Configuring Native Supplicant for 802.1X Authentication
slug: ag-25x/configuring-native-supplicant-for-8021x-authentication
createdAt: 2026-07-27T04:11:10.527Z
---

### Example: Configuring Windows 7 Native Supplicant for IPS 802.1X Authentication

The 802.1X wired LAN Authentication gives you the possibility to connect your device using the cable network (wired). You can use the windows native supplicant for 802.1X authentication.

### Requirements

- Your device must be equipped with a LAN interface and meet the standards for connecting to enterprise networks requiring 802.1X authentication.
- Local admin privileges are required on the endpoint.
- The OS security updates are installed and an Antivirus Software is present and up-to-date.
- It is recommended to disable all third-party connection management tools so that the native Windows tool is used.

### Configuring the Windows Native Supplicant

To configure the native supplicant:

1. Select **Control Panel > System and Security > Administrative Tools** and access the Services tool.
   In the services window locate the service named **Wired Autoconfig** and double click the service.

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/HKB14kPpE3azg8JRbYSF0_servicetool.png" position="flex-start" size="50" width="497" height="58" initialPath="images/service_tool.png" githubPath="images/service_tool.png" darkWidth="497" darkHeight="58" showCaption="false"}

1. Select the Startup type **Automatic** and click **Start**.

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/h_m1bl13bgMHBiJ3F6sF5_wiredautoconfigproperties.png" position="flex-start" size="42" width="420" height="476" initialPath="images/wired_autoconfig_properties.png" githubPath="images/wired_autoconfig_properties.png" darkWidth="420" darkHeight="476" showCaption="false"}

1. Click **Start > Control Panel > Network and Internet > Network and Sharing Center.**
2. Select **Change adapter settings&#x20;**&#x61;nd then right click on the LAN adapter, Ethernet or Local Area Connection and select Properties.
3. Click the **Authentication** tab at the top of the window. Select **Enable IEEE 802.1X authentication and Fallback to unauthorized network access**. From the dropdown list about the network authentication, choose Microsoft: Protected EAP (PEAP).
4. Click **Settings** to choose the authentication method and then click OK to proceed.

:::hint{type="info"}
If you choose **Remember my credentials for this connection each time I'm logged on the user credentials&#x20;**&#x61;re not prompted for every log in. Don't use this option if multiple people are using the device.
:::

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/KQ2g_pUXWNDeksO3s4QZB_ethernetproperties.png" position="flex-start" size="38" width="375" height="499" initialPath="images/ethernet_properties.png" githubPath="images/ethernet_properties.png" darkWidth="375" darkHeight="499" showCaption="false"}

1. Uncheck **Verify the server's identity by validating the certificate&#x20;**&#x61;nd select the **Enable Fast Reconnect&#x20;**&#x6F;ption. Click **Configure** to continue.

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/iyF61HWdjWR8N6bd-oOPB_protectedeapproperties.png" position="flex-start" size="38" width="379" height="568" initialPath="images/protected_eap_properties.png" githubPath="images/protected_eap_properties.png" showCaption="false"}

1. Uncheck **Automatically use my Windows logon name and password** and click **OK** to confirm.

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/V-_IO-d8pdxPxHognxQ6T_eapmschapv2properties.png" position="flex-start" size="30" width="301" height="180" initialPath="images/eap_mschapv2_properties.png" githubPath="images/eap_mschapv2_properties.png" showCaption="false"}

1. Click **Additional Settings.**

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/t4mSiWm0CacMoFsLMQ-CV_ethernetproperties1.png" position="flex-start" size="38" width="375" height="499" initialPath="images/ethernet_properties_1.png" githubPath="images/ethernet_properties_1.png" showCaption="false"}

1. Select **Specify authentication mode** and choose **User authentication** from the list.
2. If you are using Cisco switch/WLC then you can use Save credentials to save the user credentials.

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/xTLIR6HygYpJQlnHWMAag_advancedsettings.png" position="flex-start" size="37" width="374" height="491" initialPath="images/advanced_settings.png" githubPath="images/advanced_settings.png" showCaption="false"}

1. Click **Additional Settings** and choose **User authentication** and then Click **OK**.

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/R3vELc0-EM1q9cGRziM91_advancedsettings1.png" position="flex-start" size="39" width="389" height="507" initialPath="images/advanced_settings_1.png" githubPath="images/advanced_settings_1.png" showCaption="false"}

1. Plug the network cable and If already inserted, unplug it and attach it again.
2. A log in window pops to enter **Username** and **Password**.

### Example: Configuring Mac OSX Native Supplicant for IPS 802.1X Authentication

This section details the procedure for configuring native Mac OSX supplicant for IPS 802.1X authentication.

### Requirements:

- Apple Mac OSX endpoint
- iPhone Configuration utility

### Configuring MAC OSX Native Supplicant

Authentication to a IPS 802.1X server in MAC OSX endpoints is achieved using Apple Configurator. This tool allows you to easily create, maintain, and install configuration profiles, track and install provisioning profiles, and capture device information including console logs.

:::hint{type="info"}
The latest MAC OSX endpoints can be configured using Apple Configurator 2 tool.
:::

### Configuring 802.1x profile

You can create various profiles (TTLS/PAP, TTLS/MS-CHAP-V2, and PEAP/MS-CHAP-V2) required for IPS 802.1x authentication using Apple Configurator. The generated configuration profiles can be exported to a Mac OSX endpoint. To create profiles, install the profiles (by double clicking on the exported files) on their OSX endpoints and that will provision Layer 2 access when connected to 802.1x enabled switch port.

Configuring 802.1x profiles -TTLS/PAP, TTLS/MS-CHAP-V2, and PEAP/MS-CHAP-V2 applies only for General and Wi-Fi settings. If the authentication server is LDAP, use TTLS-PAP for LDAP servers. If the authentication server is Active Directory or local, use TTLS-MSChapV2 or PEAP-MSChapV2.

### Configuring TTLS-PAP Authentication Profile

To configure TTLS-PAP profile, perform the following:

1. On the iPhone configuration utility (IPCU) navigate to **Configuration Profiles&#x20;**&#x74;ab.
2. On configuration Profiles page, select General and enter the required values.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/tuaCFbldUJdoakEgDUkk-_ttlspapgeneralconfiguration.png" alt caption size="80" width="1161" height="628"}
3. Select Wi-Fi and enter the required values. :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/39xWGOgfRNtiX_1nIGnPJ_ttlspapwifi.png" alt caption size="80" width="946" height="681"}

### Configuring TTLS/MS-CHAP-V2 Authentication Profile

To configure TTLS/MS-CHAP-V2, perform the following:

1. On the iPhone configuration utility (IPCU) navigate to **Configuration Profiles&#x20;**&#x74;ab.
2. On configuration Profiles page, select General and enter the required values. :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/InAgNUhlgBOVAG09qyLZ6_ttlschapv2general.png" alt caption size="80" width="915" height="474"}
3. Select **Wi-Fi** and enter the required values. :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/18dc0amu3hLtd8yT-85CJ_ttlschapv2wifi.png" alt caption size="80" width="910" height="598"}

### Configuring PEAP Authentication Profile

To configure PEAP, perform the following:

1. On the iPhone configuration utility (IPCU) navigate to **Configuration Profiles** tab.
2. On configuration Profiles page, select **General** and enter the required values. :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/PMFld3vTDhF6UuidIqg1H_peapchapv2general.png" alt caption size="80" width="890" height="503"}
3. Selec&#x74;**&#x20;Wi-Fi&#x20;**&#x61;nd enter the required values. :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/WhrUiD14sfD3_8pJJKPP3_peapchapv2wifi.png" alt caption size="80" width="926" height="572"}
