---
title: Configuring IPS with ScreenOS Firewall
slug: ag-25x/configuring-ips-with-screenos-firewall
createdAt: 2026-07-27T04:11:10.636Z
---

The ScreenOS Enforcer connects to IPS over an SSH connection that uses the NetScreen Address Change Notification (NACN) protocol. IPS uses the NACN password and serial number for a connection from the ScreenOS Enforcer. When the ScreenOS Enforcer first turns on, it sends an NACN message containing the NACN password and serial number to IPS. IPS uses the serial number to determine which ScreenOS Enforcer is attempting to connect, and IPS uses the NACN password to authenticate the ScreenOS Enforcer. IPS then begins communicating with the ScreenOS Enforcer using SSH.

### Configuring ScreenOS Infranet Enforcer in IPS

To configure a SRX Firewall Infranet Enforcer in IPS:

1. Select **Endpoint Policy > Infranet Enforcer**.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/5MBjT5ZWP17rDe1YmkWKO_infranetenforcer5.png" alt caption size="80" width="1343" height="321"}
2. Click **New Infranet Enforcer&#x20;**&#x61;nd select ScreenOS Firewall in the **Platform** drop down. :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/AJUmK-vt7ZbKXY0ulUQgf_screenosfirewall.png" alt caption size="80" width="1068" height="556"}
3. Enter an NACN password for this Infranet Enforcer in the NACN password box. You must enter this same NACN password when configuring the Infranet Enforcer.
4. In the appropriate boxes, enter the administrator name and password for signing into the Infranet Enforcer
5. Enter the name of the Infranet Enforcer in the **Name** box.
6. Enter the password for the ScreenOS enforcer.
7. Enter the serial number of the ScreenOS Enforcer. You can view the serial number on the ScreenOS device using the command: **get system**
8. Select **No 802.1X&#x20;**&#x66;rom the Location Group list if you are not using an Infranet Enforcer as an 802.1X RADIUS client.
9. Ensure that the server certificate for IPS is configured for the interface to which the SRX device is connecting.
10. Click **Save Changes**.

When you finish configuring the Infranet Enforcer, the Infranet Enforcer attempts to connect to IPS. If the connection is successful, a green dot is displayed next to the Infranet Enforcer icon. Under Enforcer Status select **System > Status > Overview.** The Infranet Enforcer IP address is also displayed in **Endpoint Policy > Infranet Enforcer > Connection**.

### Configuring Auth Table Mapping Policies

An auth table consists of username, a set of roles, and IP address of the wired adapter, wireless adapter, or virtual adapter of the user device. Using SRX series firewall you can dynamically create auth table entries when a user tries to access the protected resource. An auth table mapping policy specifies which enforcer device can be used for each user role. These policies prevent the IPS from creating unnecessary auth table entries on all connected enforcer devices.

For complete configuration information, see [Configuring Auth Table Mapping Policies](docId\:U7ZbTX7aSz9bVic8rLz2c)

### Configuring Resource Access Policy

A resource access policy specifies which users are allowed or denied access to a set of protected resources. You can specify which users you want to allow or deny by choosing the roles for each firewall enforcer access policy.

For complete configuration procedure, see [Configuring Resource Access Policy](docId\:U7ZbTX7aSz9bVic8rLz2c)
