---
title: Configuring IPS for Guest Wired Authentication using Cisco Switch
slug: ag-25x/configuring-ips-for-guest-wired-authentication-using-cisco-switch
createdAt: 2026-07-27T04:11:11.607Z
---

This section describes the configuration that is required on IPS to communicate with a Cisco switch for Guest wired authentication.

To configure IPS for guest wired authentication:

1. Select **Authentication > Auth. Servers**. The Authentication Servers screen appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/NdKiojxWzcgTcToFsMsNU_guestwiredauthentication.png" alt caption size="80" width="1436" height="344"}
2. Click **Guest Wired Authentication** available by default to view the settings.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/4esATEqqQJYQyALvXQEPw_guestwiredauthenticationsettings.png" alt caption size="80" width="1365" height="859"}
3. You can make the necessary changes and click **Save Changes**.
4. Selec&#x74;**&#x20;Users > User Roles.** The User Roles page appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/N4nfPc_vjQgqMpbcz8qHP_guestwiredrestrictedrole.png" alt caption size="80" width="1431" height="797"}
5. Clic&#x6B;**&#x20;Guest Wired Restricted&#x20;**&#x75;ser role available by default. The Agentless access is enabled for this role. You can also configure Host Checker for assessing the compliance statuts of the endpoint.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/bVGjPw2pXQ7X_D2tgpa2M_guestwiredauthenticationgeneralsettings.png" alt caption size="80" width="1449" height="735"}
6. Select **Endpoint Policy > MAC Address Authentication Realms&#x20;**&#x61;nd click **Guest Wired authenticatio**n realm available by default.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/wnTzn1reDauBQYcWtcun5_macauthrealmguestwired.png" alt caption size="80" width="1397" height="821"}
7. Select the default role mapping rule, which specifies the conditions to assign the Guest Wired Restricted role.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/l079B-5F0X0UGxjyWhzuj_guestwiredrolemap.png" alt caption size="80" width="1441" height="369"}
8. Select E**ndpoint Policy > Network Access > Location Group.** Select **Guest Wired** as MAC Auth Realm.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/wmhU4k9BxGrup_M3uPICX_guestwiredlocationgroup.png" alt caption size="80" width="1421" height="331"}
9. Configure the Cisco switch as a RADIUS client. Ensure that the Guest Wired location group and Support CoA Messages options are enabled.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/Tg9VDENjlc-M7OXVph5wO_radiusclientguestwired.png" alt caption size="80" width="1361" height="597"}
10. Configure the RADIUS return attributes for Guest Wired policy. The RADIUS return attributes are required for moving the endpoint to the appropriate VLAN. :inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/hg5_4ZetgoZSQ7-fajXH5_radiusreturnattributesguestwiredauthentication.png" alt caption size="80" width="1367" height="651"}
11. The user configures the RADIUS URL-redirection attributes on the Cisco Switch. Using RADIUS URL-Redirection return attributes the Cisco switch redirects any initial HTTP/s traffic to IPS.
    You must configure the following return attributes (supported only on Cisco switches):

    ```bash
    Cisco-AVPAIR=url-redirect-acl=REDIRECT_To_IPS
    ```

    ```bash
    Cisco-AVPAIR=url-redirect=https://<IPS-SIGN-IN-URL>/guest?ClientMacAddr=<callingStationId>
    ```

Here in redirect guest portal URL (\*/guest), the "ClientMacAddr" is to identify the end client being redirected to IPS. As part of MAB authentication, IPS updates the value of radius return attribute "url-redirect" and replaces \<callingStationId> with the client MAC address.

The RADIUS CoA configuration for various Cisco switch platforms is described below.

| Cisco Platform | IOS Version | RADIUS CoA Configuration                                                                                                           |
| -------------- | ----------- | ---------------------------------------------------------------------------------------------------------------------------------- |
| 3850           | 16.3        | Filter-Id=PERMIT-ALL.in                                                                                                            |
| 2960X          | 15.2        | Filter-Id=PERMIT-ALL.in                                                                                                            |
| 2960           | 12.2        | Filter-Id=PERMIT-ALL.in<br />CiscoAVPAIR=subscriber\:command=reauthenticate<br />Cisco-AVPAIR=subscriber\:reauthenticate-type=last |

::Image[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/bbktJOqJFTMtQZ0-4YV6B_radiusattributepoliciesguestwired.png" position="flex-start" size="80" width="1358" height="1525" initialPath="images/radius_attribute_policies_guest_wired.png" githubPath="images/radius_attribute_policies_guest_wired.png" showCaption="false" indent="1"}
