---
title: Configuring Aruba Instant Access Point
slug: ag-25x/configuring-aruba-instant-access-point
createdAt: 2026-07-27T04:11:11.739Z
---

To configure Aruba Instant Access Point:

1. Login to the Aruba Instant Access portal. The Aruba Instant page appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/87145n6hzZhXrsaOmhbEO_arubainstanthomepage.png" alt caption size="80" width="1600" height="780"}
2. Click **New** to create a new SSID. The New WLAN window appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/tRlFAUX_QMHYGwqQtusgN_creatinganewwlan.png" alt caption size="80" width="1239" height="652"}
3. In the WLAN Settings tab:
4. In the New (SSID) field enter a name for the SSID.
5. In the Primary usage options select **Guest**.
6. Click **Next**.
7. The VLAN tab options appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/vysHvdlf8DGYihUJILiGm_vlansettings.png" alt caption size="80" width="866" height="523"}
8. Keep the DHCP setting as per your network design.
9. Client IP assignment here Network Assigned is chosen.
10. For Client VLAN assignment here **Default**. is chosen
11. Click **Next**.
12. The Security tab options appear.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/ug81DvOWIpkomLbzddguK_securitysettingsoptions.png" alt caption size="80" width="869" height="634"}

In the Security Level section do the following:

1. From the Security page type, drop-down list select External.
2. From the Captive portal profile, drop-down list select New
3. The **New** screen appears.
4. Enter the details as shown in the above figure and then click OK.
5. The newly created captive portal appears in the Captive portal profile drop-down list.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/9Ue9WbUgYMK6cuaLHb4zD_securitysettingscreatinganewserver.png" alt caption size="80" width="866" height="723"}
6. From the Auth server 1 drop-down list select New.
7. The New Server screen appears.
8. Create a server pointing to IPS server. Enter the details as shown in figure and then click OK.
9. The configured Security tab options appear as in the following figure.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/Xtx2HSkmoXSomMUKTaQB3_securitysettingscompleted.png" alt caption size="80" width="867" height="636"}
10. Click **Next**. The Access tab options appear.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/6ky1tgMzfitfNi4azmc46_accesssettings.png" alt caption size="80" width="867" height="547"}
11. In the Access Rules section:
12. Move the slider to Role-based,
13. Under the Roles section, click New to create a new role ‘pre-logon’.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/EHIhH-4uDyrJ0kksWvoqX_accesssettingscreatingarole.png" alt caption size="80" width="865" height="547"}
14. Under the Access Rules section click **New** to create an access rule for the role. The New Rule window appears.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/FbiWD4CpXT1lpUuLapw_P_accesssettingscreatingarule.png" alt caption size="80" width="883" height="304"}
15. Select the options as shown in the above figure.
16. From the Destination drop-down list select ‘to a particular server’.
17. In the IP box enter the IPS server’s IP address.
18. Click OK.
19. The Access Rule appears in the Access Rules for list box.:inlineImage[]{src="https://api.archbee.com/api/optimize/wxZG1KsS4xNkVZYoiu_o9/ESZJjVlpeMTVRK1MBrn-X_accesssettingscreatinganaccessrule.png" alt caption size="80" width="864" height="540"}
20. Select the Assign pre-authentication role check box and then select ‘pre-logon’ from the drop-down list.
21. Click **Finish** to complete the settings.
