--- title: Adding domains for split tunneling slug: access/guide/adding-domains-for-split-tunneling docTags: createdAt: 2026-09-07T09:11:00.248Z --- Add destination domains to configure which domains go directly to the destination and which domains go via Standalone Sentry. Before you begin  - Verify that the Ivanti Tunnel-enabled apps and Safari are tested before deploying to production. This is because enabling or disabling split tunneling in Ivanti Access impacts the traffic through Ivanti Tunnel . - Verify that split tunneling is enabled in Ivanti Access. See [Enabling split tunneling ](docId:622bsV7HXn_G95-8-TLFT). **Procedure ** | | 1. | In Ivanti Access, go to Profile > **Split Tunneling**. | | - | -- | ------------------------------------------------------ | The Split Tunneling Configuration page displays. | | 2. | Click **Add Domain**. | | - | -- | --------------------- | | | 3. | In the **Add Split Tunneling Rule **pane, enter the name for the rule. | | - | -- | -------------------------------------------------------------------------------- | | | 4. | (Optional) Enter a description for the domain. | | - | -- | ---------------------------------------------- | | | 5. | In the **Split Tunnel Config** section, enter the destination domain. | | - | -- | --------------------------------------------------------------------- | Examples: login.example.com or \*.example.com | | 6. | In the **Action** drop-down, select the appropriate action. | | - | -- | ----------------------------------------------------------- | | | - | **Send to destination via Sentry**: Traffic destined to the domain is sent to Standalone Sentry. | | - | - | ------------------------------------------------------------------------------------------------ | | | - | Send directly to destination: Traffic destined to the domain goes directly to the destination. | | - | - | ---------------------------------------------------------------------------------------------- | | | 7. | Click **Done**. The domain rule is added to the table and is enabled by default. | | - | -- | -------------------------------------------------------------------------------- | | | 8. | Click Publish to make the changes available. | | - | -- | -------------------------------------------- |